Page 1 of 1
Problems with the sound on my ESX-1
Posted: Sun Jan 12, 2014 5:08 am
by StAsmodeus
Currently I've been having a problem with the sound on my ESX... No matter what output port I am using, I only get sound coming from the right channel. Even while using the headphone port. Is there already another thread that addresses this issue? If so could anyone point me to the right direction? Otherwise I'm stumped...
Posted: Sun Jan 12, 2014 3:48 pm
by robosardine
You may have a faulty tube- you can test this by trying outputs 3&4- they should work fine (as they bypass the tubes). If they do then you will know you have a tube that needs replacing.
Posted: Sun Jan 12, 2014 7:03 pm
by StAsmodeus
Checked out the 3/4 outputs and I get no sound out of either one...
Posted: Sun Jan 12, 2014 7:10 pm
by StAsmodeus
Oh good gravy, I was an idiot... I forgot to switch the output bus on each part... Yes it would appear as if I have a tube problem.
Posted: Mon Jan 13, 2014 8:07 am
by StudioF
glad to read that your ESX is fine.