Korg Forums

Yesterday while checking some of my PROG in Kronos OS 3 , I think I found a bug in HD1/Prog/Filter.
In a few programs , there is no graphic illustration curve of 3 filters there , especially Filter A is not shown at all !
This was not happening while under OS v2 , I tried to find out what could cause this in OS 3 but with
no results , so I uploaded one Program (U-GG) here http://goo.gl/aVqFFA for anyone to check it.

Also found some notes gaps in very well tuned WaveSequencers I had made in OS 2 , only in the beginning of their
operation then they work fine ... still looking through this !

Thanks

This is not an issue. Filter Output Level is set to 0 in your program settings . Try to increase it and You will see how the illustrarion changes.

This was not happening under OS 2 because Korg changed many graphic things in os 3, for example, filter graph which indicates not only frequency but output level too.

Thanks Dmitry , you're right ,but consider that I always send filter AMS +99 to a controller in my sound timbres development
f.e. SW1 and you see no realtime volume graphics when turning SW1 on , or if you set Filter A output to 99 and filter B to 0 &
AMS +99 to a controller , in serial filter routing and so I have to guess for results with no realtime changes when enabling
controller which is wrong UMHO and I strongly prefer filter "level-less" illustration of OS v2 for advanced sound development !

Usualy in realtime You don`t need to see filter graph, for example live performance in setlist mode. Filter graph shows current settings using default positions of RT controls. This is not an issue. This is feature, or maybe innovation from Korg, as You want. I personally don`t like this graph behavior too, like You, but we can`t call this an "issue".

You don't get my point , we need filter graphic illustration while developing a sound ! there is my point not setlists or any ...
Finally not a real issue , nor definitely a feature for me , just mess my filter developing , anyway thanks for your help.

So, what we can do - is to ask Korg to make old-style filter graph.