Newbie and need to hookup with DAW Reason 7

Chotsaeng · Post by **Chotsaeng** » Mon Jul 22, 2013 7:27 am

Hi Folk,

Can anyone guide me how to record midi data such as drum, bass and ACC etc. to Reason as DAW?

Can I record by separated channel of Midi?

Thank you in advance...

Karimh · Post by **Karimh** » Tue Jul 23, 2013 5:43 pm

Are you using PA600? MIDI controller?

Which sounds are you triggering? The instruments in Reason or PA600?

Chotsaeng · Post by **Chotsaeng** » Thu Jul 25, 2013 2:20 am

I use PA600 and need to hook with Mac Reason7. No midi controller. I want to get midi from style in PA600 such as drum bass and acc to be recorded in Rwason

Karimh · Post by **Karimh** » Fri Jul 26, 2013 2:36 pm

If you want to record the sounds/audio from PA600, then just wire your Audio OUT of PA600 to your Audio IN of your PC/MAC.

If you're recording the MIDI Data from the styles on the PA600 to trigger sounds in Reason, then connect MIDI OUT from PA600 to your MIDI IN of your PC/MAC.

Chotsaeng · Post by **Chotsaeng** » Sat Jul 27, 2013 5:34 pm

Thank you but data from track style including bass drum acc1 acc2 could not be recorded in to Reason

Thoraldus · Post by **Thoraldus** » Sat Jul 27, 2013 6:00 pm

Be sure to go to Global > Midi > Midi Out Channel and set up the midi outputs to send out the channels you want to record. You need to set up 12 midi output channels to record everything ...

Upper 1
Upper 2
Upper 3
Lower
Acc 1
Acc 2
Acc 3
Acc 4
Acc 5
Drum
Perc
Bass