SQ-1+Monotribe problem
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
SQ-1+Monotribe problem
I linked a brand new sq-1 to my monotribe 2.1 via cv, but it seems that, despite every configuration i try, sq-1 can only send (or monotribe can only receive) 1 note and only at a certain knob position. Am I missing something? or is my unit defective? MIDI works perfectly, usb too...
Hi,
Well, the monotribe combines CV and Gate in one stereo mini jack plugged into the SyncIn.
The SQ-1 outputs the CV and Gate signals as separate outputs. So you need a converter cable that brings the 2 signals from the SQ-1 into one jack towards the monotribe.
I'm afraid you will need to solder a bit, but it should not be too hard. Get some inspiration here:
https://www.youtube.com/watch?v=JyUbJf0AEkQ
https://www.youtube.com/watch?v=QFVz-I7zx1A
Ciao.
Well, the monotribe combines CV and Gate in one stereo mini jack plugged into the SyncIn.
The SQ-1 outputs the CV and Gate signals as separate outputs. So you need a converter cable that brings the 2 signals from the SQ-1 into one jack towards the monotribe.
I'm afraid you will need to solder a bit, but it should not be too hard. Get some inspiration here:
https://www.youtube.com/watch?v=JyUbJf0AEkQ
https://www.youtube.com/watch?v=QFVz-I7zx1A
Ciao.
microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G