I inserted a brand new 1tb SSD in Host1. Pa5x asked to reformat it which I did. Now, it cannot be seen by either Pa5x or my laptop.
I am wondering if;
1. I made an error in formatting (this is highly doubtful)
2. there is a size limit (1 tb is too big?)
3. Issues using SSD?
Has anyone run into this issue? I could not find any information on the forum. Please help.
Thank you,
Sincerely,
Kauser
Host1 and Host2 USB issues
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
- KauserImtiaz
- Posts: 26
- Joined: Sun Jul 16, 2023 8:22 pm
- Location: Houston, USA
Host1 and Host2 USB issues
Sincerely,
Kauser Imtiaz
NASA Scientist and Music Hobbyist
Pa5x, Pa2xPro
Kauser Imtiaz
NASA Scientist and Music Hobbyist
Pa5x, Pa2xPro
- KauserImtiaz
- Posts: 26
- Joined: Sun Jul 16, 2023 8:22 pm
- Location: Houston, USA
Thanks RikW.
FAT32 is most widely used but it is slow. Most high capacity drives come formatted as exFAT these days. I am surprised Pa5x still uses FAT32. Generally, exFAT is pretty compatible with FAT32 devices, but it may not be true for Pa5x.
I am sure I can work around this.
FAT32 is most widely used but it is slow. Most high capacity drives come formatted as exFAT these days. I am surprised Pa5x still uses FAT32. Generally, exFAT is pretty compatible with FAT32 devices, but it may not be true for Pa5x.
I am sure I can work around this.
Sincerely,
Kauser Imtiaz
NASA Scientist and Music Hobbyist
Pa5x, Pa2xPro
Kauser Imtiaz
NASA Scientist and Music Hobbyist
Pa5x, Pa2xPro
- AntonySharmman
- Approved Merchant
- Posts: 3733
- Joined: Sat Oct 16, 2010 2:24 pm
- Location: Hellas
- Contact:
- If you can't see SSD in your Win laptop , go to computer manager/Disk manager , select new disk and change drive letter adding letter to disk.
- Then use a disk utility for formatting it to FAT32 , since windows do not address high capacities in Fat but only in exFAT.
- ExFAT & NTFS maybe be a little faster in big monolithic files but all have the same speed in small files , and this is of what Pa5X KST files are !
- USB port in Pa5X do not meet the speed of USB 3,2 port of a PC/Laptop it is still too slow compared to pa5X upper mSD port.
- It's completely useless to use any USB external SSD into Pa5X , you can never reach nominal SSD speed and a fast USB 3 thumb drive
is always the best option in any aspect.
- As last , external USB SSD drives have various USB protocols and might not be compatible to Pa5X USB port , never use adapters in media storage.
Hope this helps
- Then use a disk utility for formatting it to FAT32 , since windows do not address high capacities in Fat but only in exFAT.
- ExFAT & NTFS maybe be a little faster in big monolithic files but all have the same speed in small files , and this is of what Pa5X KST files are !
- USB port in Pa5X do not meet the speed of USB 3,2 port of a PC/Laptop it is still too slow compared to pa5X upper mSD port.
- It's completely useless to use any USB external SSD into Pa5X , you can never reach nominal SSD speed and a fast USB 3 thumb drive
is always the best option in any aspect.
- As last , external USB SSD drives have various USB protocols and might not be compatible to Pa5X USB port , never use adapters in media storage.
Hope this helps
Music Conductor - Sound Engineer & Developer - Automotive SMPS/RF R&D - Electronics Engineer
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

wavesΑrt official webpage - KorgPa.gr
DEMO's Playlist - WavesArt Facebook
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

wavesΑrt official webpage - KorgPa.gr
DEMO's Playlist - WavesArt Facebook
- KauserImtiaz
- Posts: 26
- Joined: Sun Jul 16, 2023 8:22 pm
- Location: Houston, USA
Thank you Antony.
Nice clarification. I have a better idea on how I want to use the USB ports.
It was never my plan to use large/fast SSDs in Pa5x. I have a1Tb SSD which is dedicated to my music management via PC. While working on 5x, I want to transfer or search files on the SSD. Therefore, a direct connection to 5x saves me going back to my PC saves a couple steps and time.
I also wish Pa5x having a USB C port as well. This is the current default port on many computers and electronic devices.
Thank you,
Nice clarification. I have a better idea on how I want to use the USB ports.
It was never my plan to use large/fast SSDs in Pa5x. I have a1Tb SSD which is dedicated to my music management via PC. While working on 5x, I want to transfer or search files on the SSD. Therefore, a direct connection to 5x saves me going back to my PC saves a couple steps and time.
I also wish Pa5x having a USB C port as well. This is the current default port on many computers and electronic devices.
Thank you,
Sincerely,
Kauser Imtiaz
NASA Scientist and Music Hobbyist
Pa5x, Pa2xPro
Kauser Imtiaz
NASA Scientist and Music Hobbyist
Pa5x, Pa2xPro