Hello,
the Radias sequencer does not and cannot output midi, is this correct ?
Radias, step sequencer midi output.
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Re: Radias, step sequencer midi output.
yep, same for the arpeggiatorauto-lock wrote:Hello,
the Radias sequencer does not and cannot output midi, is this correct ?
Current: MS-20 Mini, Minilogue, SY77
Past: Korg R3, Volca Bass, X50, Mg Slim Phatty, Rld Gaia SH-01, Yamaha TX81Z
Have my freebie granular plug-in: https://www.muffwiggler.com/forum/viewt ... p?t=192886
Past: Korg R3, Volca Bass, X50, Mg Slim Phatty, Rld Gaia SH-01, Yamaha TX81Z
Have my freebie granular plug-in: https://www.muffwiggler.com/forum/viewt ... p?t=192886
Not true.
In global mode you can set the 'Position' to Pre/Post.
In PreTG mode, MIDI is output only from the keyboard/controls, and input is inserted in the same point, into the arpeggiator/sequencers.
In PostKBD mode, MIDI output is routed from the arpeggiator/sequencers, input comes in after the sequencers.
So in PostKBD mode, you can get the output from the sequencers and arpeggiator, but you'll have to trigger it with the 16 buttons, or the built in keyboard - you can't trigger it by MIDI.
It is the 'modulation step sequencer' which can't be transmitted by MIDI on the Radias or R3, which wouldn't make sense anyway because the modulation from the mod sequencers can be polyphonic, is is only controlling control values, not actual note data.
In global mode you can set the 'Position' to Pre/Post.
In PreTG mode, MIDI is output only from the keyboard/controls, and input is inserted in the same point, into the arpeggiator/sequencers.
In PostKBD mode, MIDI output is routed from the arpeggiator/sequencers, input comes in after the sequencers.
So in PostKBD mode, you can get the output from the sequencers and arpeggiator, but you'll have to trigger it with the 16 buttons, or the built in keyboard - you can't trigger it by MIDI.
It is the 'modulation step sequencer' which can't be transmitted by MIDI on the Radias or R3, which wouldn't make sense anyway because the modulation from the mod sequencers can be polyphonic, is is only controlling control values, not actual note data.
Current Gear: Kronos 61, RADIAS-R, Volca Bass, ESX-1, microKorg, MS2000B, R3, Kaossilator Pro +, MiniKP, AX3000B, nanoKontrol, nanoPad MK II,
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
Oh. My bad. I was thinking of the R3s mod sequencer, and I had no clue about the ability to transmit the arp, I had read somewhere it was impossible.X-Trade wrote:Not true.
In global mode you can set the 'Position' to Pre/Post.
In PreTG mode, MIDI is output only from the keyboard/controls, and input is inserted in the same point, into the arpeggiator/sequencers.
In PostKBD mode, MIDI output is routed from the arpeggiator/sequencers, input comes in after the sequencers.
So in PostKBD mode, you can get the output from the sequencers and arpeggiator, but you'll have to trigger it with the 16 buttons, or the built in keyboard - you can't trigger it by MIDI.
It is the 'modulation step sequencer' which can't be transmitted by MIDI on the Radias or R3, which wouldn't make sense anyway because the modulation from the mod sequencers can be polyphonic, is is only controlling control values, not actual note data.
Sorry!
Current: MS-20 Mini, Minilogue, SY77
Past: Korg R3, Volca Bass, X50, Mg Slim Phatty, Rld Gaia SH-01, Yamaha TX81Z
Have my freebie granular plug-in: https://www.muffwiggler.com/forum/viewt ... p?t=192886
Past: Korg R3, Volca Bass, X50, Mg Slim Phatty, Rld Gaia SH-01, Yamaha TX81Z
Have my freebie granular plug-in: https://www.muffwiggler.com/forum/viewt ... p?t=192886
it worked! thanks so much!!!X-Trade wrote:Not true.
In global mode you can set the 'Position' to Pre/Post.
In PreTG mode, MIDI is output only from the keyboard/controls, and input is inserted in the same point, into the arpeggiator/sequencers.
In PostKBD mode, MIDI output is routed from the arpeggiator/sequencers, input comes in after the sequencers.
So in PostKBD mode, you can get the output from the sequencers and arpeggiator, but you'll have to trigger it with the 16 buttons, or the built in keyboard - you can't trigger it by MIDI.
It is the 'modulation step sequencer' which can't be transmitted by MIDI on the Radias or R3, which wouldn't make sense anyway because the modulation from the mod sequencers can be polyphonic, is is only controlling control values, not actual note data.
