When this happen in Pa3X , do not panic !!!
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
- AntonySharmman
- Approved Merchant
- Posts: 3733
- Joined: Sat Oct 16, 2010 2:24 pm
- Location: Hellas
- Contact:
When this happen in Pa3X , do not panic !!!
Many friends & clients of mine had faced following issue and I think it's time
to report it , since still happens under OPS 1.5.
If one day you turn on your Pa3X and there is no sound at all ,either at
rear outputs nor at headphones , don't panic , go to Global/Maxx and turn off
"waves" module since it's frozen and sound will reveal back after a strong crackle.
In next boot almost always this issue is lost !
Also that annoying system freeze under even editing in record mode, still insists
after OPS 1.5 , especially if you operate fast like me ! (easy to re-create).
to report it , since still happens under OPS 1.5.
If one day you turn on your Pa3X and there is no sound at all ,either at
rear outputs nor at headphones , don't panic , go to Global/Maxx and turn off
"waves" module since it's frozen and sound will reveal back after a strong crackle.
In next boot almost always this issue is lost !
Also that annoying system freeze under even editing in record mode, still insists
after OPS 1.5 , especially if you operate fast like me ! (easy to re-create).
Last edited by AntonySharmman on Thu Oct 01, 2015 2:39 pm, edited 1 time in total.
Music Conductor - Sound Engineer & Developer - Automotive SMPS/RF R&D - Electronics Engineer
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

wavesΑrt official webpage - KorgPa.gr
DEMO's Playlist - WavesArt Facebook
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

wavesΑrt official webpage - KorgPa.gr
DEMO's Playlist - WavesArt Facebook
Hi Antony
Are these issues going to be resolved as the wrongs seems to be stacking up.
Just after reading all the encouraging mails regarding my concerns and now here is another one.
Is there a hardware design fault thats preventing korg from getting this k/board right? cos if so then no software fixes are going to do the job... imo
fingers crossed
Are these issues going to be resolved as the wrongs seems to be stacking up.
Just after reading all the encouraging mails regarding my concerns and now here is another one.
Is there a hardware design fault thats preventing korg from getting this k/board right? cos if so then no software fixes are going to do the job... imo
fingers crossed
so what new
it did not happen in os1.11 so it must be software and Korg can fix it so far the new os is work great for me ,,
Pa4X, Pa 1000, Pa3x, Pa800, Pa80, i3
- paul
- Platinum Member
- Posts: 620
- Joined: Thu May 23, 2002 9:37 pm
- Location: Surrey, British Columbia,Canada (PA4X 61 key)
Re: When this happen in Pa3X , do not panic !!!
AntonySharmman wrote:Many friends & clients of mine had faced following issue and I think it's time
to report it , since still happens under OPS 1.5.
If one day you turn on your Pa3X and there is no sound at all ,either at
rear outputs nor at headphones , don't panic , go to Global/Maxx and turn off
"waves" module since is frozen and sound will reveal back after a strong crackle.
In next boot almost always this issue is lost !
Also that annoying system freeze under even editing in record mode, still insists
after OPS 1.5 , especially if you operate fast like me ! (easy to re-create).
Thanks Anthony,
this has happened to me 2 times after installing the new OP........my solution was to reboot and would work fine after that.
Paul
"The COOL cat"
- AntonySharmman
- Approved Merchant
- Posts: 3733
- Joined: Sat Oct 16, 2010 2:24 pm
- Location: Hellas
- Contact:
Re: so what new
Yes it happens occasionally since Pa3X was born !duby2 wrote:it did not happen in os1.11 so it must be software and Korg can fix it so far the new os is work great for me ,,
Music Conductor - Sound Engineer & Developer - Automotive SMPS/RF R&D - Electronics Engineer
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

wavesΑrt official webpage - KorgPa.gr
DEMO's Playlist - WavesArt Facebook
Keyboards : Steinway-D, Kronos X, Pa5X 76, Pa4X 76, Montage M7 , Roland-XV88, Emu3,Emax II, Synclavier II , Yamaha DX Series, ΟΒ-8V

wavesΑrt official webpage - KorgPa.gr
DEMO's Playlist - WavesArt Facebook
Re: so what new
I once had this issue and got panic but solved it. that pop sound that came out from the keyboard was almost blowing up the speakers.
Last edited by fResH_ on Thu Apr 16, 2015 6:03 am, edited 2 times in total.
// Matthew
"Its not how good you are, its the impression you leave behind."
"Its not how good you are, its the impression you leave behind."
-
- Junior Member
- Posts: 60
- Joined: Fri Dec 20, 2013 7:42 am
- Location: Tuxtla Gutiérrez, Chiapas, México.
Hi, I try with turning Off the Maxx Audio in Global and It don't work, so I have to turning off the Keyboard and turning on again.. Or probably I don't get int the right menu to do it.. Please could you specify exactly in which option works.. Because it's too shame to wait the reset when the audio guy try to open your channel... Thanks
Daniel López Rincón.. From Chiapas, México.
I'm dealing with a lovely Pa3x and with the English writing too..
"Viva la Musica and priest Christ"
So thanks for your patience and help, I really appreciate it!
I'm dealing with a lovely Pa3x and with the English writing too..
"Viva la Musica and priest Christ"
So thanks for your patience and help, I really appreciate it!