It worked for a couple of weeks, didn't even use it much, then it just stopped powering on. About every 5th time I try, it will briefly start to light up and then die. It was never dropped, bumped, or anything; I've swapped batteries and still nothing. It was bought the end of November as a Christmas present or id just send it back.
Any ideas?
Does anyone know a way to reset Kaossilator 2 ?
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Does anyone know a way to reset Kaossilator 2 ?
Korg Emx1, KP3, Monotribe, Monotron, iElectribe, iMS20, iPolySix, iKaossilator
-
- Senior Member
- Posts: 314
- Joined: Mon Sep 03, 2012 1:17 am
Even if you don't have the receipt, manufacturers are often very sympathetic when it comes to a unit that suffers from "infant mortality" as effectively it was never fit for purpose. Try contacting Korg if you can't sort it out. The Kaossilator 2 is a pretty new unit, I'd imagine that even the oldest ones would be only just out of warranty.
Korg: M3M, EMX2, EMX1 (x2), ESX1, ER1, EA1, R3, MicroKorg, MicroSampler, Micro X, KP2, KP3, KPMini 1&2, KO1&2, KP Pro
Roland: SP808, MC505, Handsonic 10, Fantom X6, RC505, CG8
Emu: Command Station MP7 (x3!), Proteus 2000, Planet Earth, Virtuoso, Planet Phatt, XBoard49
Novation: UltraNova, Nova
Yamaha: RM1X, CS2X, DX11, DX Reface, YC Reface
Other: Zoom R24, Quasimidi 309, Beat Thang, Akai MPC1000 and a couple of Omnichords
Roland: SP808, MC505, Handsonic 10, Fantom X6, RC505, CG8
Emu: Command Station MP7 (x3!), Proteus 2000, Planet Earth, Virtuoso, Planet Phatt, XBoard49
Novation: UltraNova, Nova
Yamaha: RM1X, CS2X, DX11, DX Reface, YC Reface
Other: Zoom R24, Quasimidi 309, Beat Thang, Akai MPC1000 and a couple of Omnichords
-
- Senior Member
- Posts: 314
- Joined: Mon Sep 03, 2012 1:17 am
Hi KevinVs,
the best I could get mine to do for a week was the bpm light would flash but nothing -
I removed the batteries for a couple of days - plugged the very same batteries back in this morning and it works - which seems insane.
I remember when I first got this unit i was pretty annoyed at the poor on-off button and couldn't believe somebody would whack that on for something this expensive - its tamagotchi territory.
If that doesnt work for you - I was then going to try a a power adaptor.
I'll let Neil young have the final word -
http://www.youtube.com/watch?v=FQxYfcKCpbY
the best I could get mine to do for a week was the bpm light would flash but nothing -
I removed the batteries for a couple of days - plugged the very same batteries back in this morning and it works - which seems insane.
I remember when I first got this unit i was pretty annoyed at the poor on-off button and couldn't believe somebody would whack that on for something this expensive - its tamagotchi territory.
If that doesnt work for you - I was then going to try a a power adaptor.
I'll let Neil young have the final word -
http://www.youtube.com/watch?v=FQxYfcKCpbY
-
- Posts: 28
- Joined: Mon May 07, 2012 10:41 pm
Re: Does anyone know a way to reset Kaossilator 2 ?
Hey I had a problem where the internal mic would just stop working or record in an extremely low volume. I called Korg and he advised a reset. I did it once worked fine for a few days then had to do it again. You hold the function button while powering the device on. Hope that helps. If it doesn't I would call Korg. They said they would swap mine out even though I bought i over a month ago from Amazon. Good luckKevinVs wrote:It worked for a couple of weeks, didn't even use it much, then it just stopped powering on. About every 5th time I try, it will briefly start to light up and then die. It was never dropped, bumped, or anything; I've swapped batteries and still nothing. It was bought the end of November as a Christmas present or id just send it back.
Any ideas?
notice that when fct+pwon does not work fnc+del+snd+pwon does ?
how comes are those keychords documented somewhere ?
how comes are those keychords documented somewhere ?
http://rzr.online.fr/q/synth#
I Own KAOSSILATOR 2 Firmware=v1.10
Sometimes KO2 fails to switch on ? How comes ? and how to fix this ?
I Own KAOSSILATOR 2 Firmware=v1.10
Sometimes KO2 fails to switch on ? How comes ? and how to fix this ?