Korg Forums

Reverting back to OS 2.2 and then back to OS 3.1 solved the problem.

Thank you.

The PA4X Oriental does not load the OS and restarts continuously. I had successfully installed OS 2.0 followed by 3.0, 3.01 and the latest OS 3.1 (July 2019). The keyboard was working fine until the following actions were taken: 1. Selected the Media button 2. Selected the Factory Restore option. 3 ...

The keyboard does not turn on, it continues to restart over and over again. I had updated the OS from 2.0 to 3.0 to 3.01 and the latest OS of 3.10. Before this problem occurred the following actions were taken: 1. Selected the Media button 2. Selected the Factory Restore option. The keyboard ...

Next software wish-list: 1. Midi 2.0 (particularly Midi MPE) - may need to increase the number of oscillators from 24 (this will allow greater flexibility to create instruments using sample modeling concept) 2. Ability to tune pads -- Menu, Pads Switches (add tuning to this page) 3. Increase number ...

Had several restarts - under different circumstances, can not pinpoint what exactly causes the sudden restart. Have reported it several times on the forum. Hope Korg fixes the issue soon.

I experienced the same problem yesterday. Tried to the new legato functions everything worked fine while I was in the sound edit page, when I saved the sound to a user slot the legato feature remained unchanged.

I have already reported the sudden and unexpected restart issue on the PA4X potential bug sticky section several weeks ago. The sudden restarts persists and now it happens more frequently. I wanted to share my experience in hopes of assisting Korg engineers in pinpointing the problem with their new ...

Go to Record/ Pad/ Edit/ select the pad you programmed/press menu/press pad control tab/ under pad type, change ONE SHOT to Loop. The pad sync off (will not sync the pad with the selected style tempo) continued will sync as soon as the pad is pressed and Beat will sync at the start of the beat. Hope ...

My Pa4x restarts for no reason. Details: I have created a custom beat in 4/4 time signature. Programmed drums used factory VintageKit 1 Amb, Percussion: Sampled audio (stored in User sample section), Bass: JB Finger BsDN1, Acc 1: Natural Nylon (Guitar Track) - Guitar track is used in acc 1 - 3. Pads ...

Hi, I noticed that my Korg PA4x does not have the digital output, but if I remember correctly, the PA3x had a digital output. I am not sure why Korg decided to eliminate the digital output from Korg PA4x? Has anyone use the digital output on their PA3X? what is the difference in terms of sound ...

I had upgraded to 2.01 OS (Oriental). The keyboard froze. Today I reinstalled the 2.0 OS (going backwards) and the problem is now solved.

Wonder what caused the problem in the first place.

[Start up time is increased quite significantly following the upgrade, are you sure you are waiting long enough to give the system time to start? ] Several hours and nothing. I have been working on this issue all day - nothing. Sad that you want to make music, but you have to through these types of ...

I have Korg PA4x Oriental. I had installed the 2.0 OS Oriental a couple of months ago and everything was working fine. Today I installed the updated OS 2.01 Oriental - After the keyboard was updated and the OS install was complete, I turned the keyboard off. When I turned the keyboard on, the ...

Thank you Nemic.

Thank you for pointing the obvious

My original question was about MIDI. Is it possible to transmit PC Messages from KORG PA MIDI OUT to MPC MIDI IN to trigger the 16 pads on the MPC ON/OFF?

Thanks to KORG PA4x, he even checked the MPC Manual and SAM CA that responded to my specific question.