Korg Forums

Hi, I have a 01/w so some things might be different to the X3, even if they have in general the same sound engine. You can find the manual here: https://www.korg.com/us/support/download/manual/1/230/1697/ Also if you are interested - Service Manual: https://www.manualslib.com/manual/1135798/Korg-X3 ...

Okay, I fixed it. After running around in my completely disassambled Synth with a multimeter, I idenntified, that it is just the ribbon connector on the Main PCB not haveing good contact is the issue. It was so unlikely that this could be the issue but by chance one time plugging it in, I got the ...

Hi SoundWerx, thanks for your input. Yes you are right, I baught a prewired device from eBay, where I just need the Display Connector. The Power connector for the backlight is completely removed. There is no other connection from the Main PCB to the Display then the one ribbon cable. That is so far ...

Hi, I created a problem on my own and now stuck in troubleshooting the issue. Situation: Control Panel buttons A-G and the 8 buttons left (PROG/COMBI etc), are not working. All other buttons working. It is not the "button" broken or stuck issue, as the buttons electronical do work and clearly ...

Okay, that is the solution I found ... working on 01/wfd .. 1. Reset the synth (Comp+Reset+PowerOn). 2. Write Combi/Progs to Disk 3. Load Factory defaults (Global->Page7->Load) If you now want any Prog or Combi to be Init - select Prog or Combi. Load single Prog/Combi from Disk. Of cause there is ...

Hi,

I try to start a sound from scratch - is there any way to initialize a single program before editing?

Could not find anything about that in the manuals...

Ser

This card is emulating a ROM card. So in theory it could emulate anything. However the problem is, that the physical layer is completely different. Where M1 have a propriatary format, the 01/w simply uses PCMCIA (PCCard). So potentially you could even put in a PCMCIA adapter to a CF card ... but the ...

Totally agree

Any idea what type the C: PLAX B BZMC 3x8 is?

"Blechschraube"

Oh great.

I also found this one:

https://minischrauben.com/

Your link is actually better (selling a single screw ), but not selling the exact format (3x10 instead of 3x8).

But that is awesome information.. Thanks alot.

That does not specifically state it is not working in 01/W ... it is stating that there are no others for M1...

I try to find out with the vendor ...

Hi all again, I found the right screws - just went to the next Baumarkt (Homedepot?) and this is the norm of current screws: M3 and M4 screws will do the job with correct screw length for A, B and D type screws. So for A it is: ISO 7045 or DIN 7985 M3x8 PH1 For B and D it is the exact same screw ...

Okay, I found it here: http://korg01w.vienxu.com/get-downloads/ The disk (demodisk.01w) is included in here: http://korg01w.vienxu.com/downloads/diskimagev2.3.zip Unpack the file and you will have the demodisk file. Now you need a PC with a 3.5" drive and the software rawwrite. If you do not have a ...

Hi,

I obtained a 01/w recently, that came without the XSD-00P Demo Disk, where the Demo Sequences are stored.

Can anyone who has that disk, please make an image for me (.01w) with rawwrite or anything else available and mail to me?

Thanks
Ser

Hi all, I have aquired a 01/WFD recently which is overall in a good condition. All buttons and keys working and only the typical things to refresh (Display backlight and battery). However the screws on the bottom are somehow corroded and I like to replace them. According to the manual, That are the ...

Hi,

will this also be usable in a 01/w?

Cheers
Ser