Korg Forums

Hi Gil,
are you using the cuemix software for setup/ changes to the UltraLite?
Are you wanting to run as an effects loop (KP3 as an effects processor)?
Cheers, Hanon

Hi Nick, check the Global MIDI.Rout setting of the Micro Sampler and set it to "MIDI". The USB-MIDI parameter choice is subject to driver settings and might interfere with how MIDI is sent to the 5 pin MIDI Out connector. Also make sure the transmit and receive channels match on the appropriate ...

The preset bank of ROM samples are the only thing which responds to velocity. All of my own samples play at fixed velocity. Anyone else had this? How do you fix it? Any help greatly appreciated, Nick Hi Nick, check the VEL INT (Velocity Intensity) parameter. The higher the number, the more effect ...

Was told to look at the sonar firebox £189...... What you think? Looks like a good option. I dismissed it initially because I didn't think that it had enough inputs and outputs for your needs. It also lacks MIDI which I thought that you might also find useful. I suppose that you could buy a mixer ...

Hello all,
In my disappointment over the broken link, I decided to post one of mine.

Cheers mates, Hanon

connect a kaossilator pro, a wave drum and a kaoss pad into an new iMac with pro logic 9. What is the best kind of sound card to connect to and record my musical creations ? Hello drembeats, Welcome to the forums. What is your budget for this piece of equipment? For my MBP I use the MOTU UltraLite ...

ephemera wrote: Anyone try replacing these? Or had Korg do it?

Hello ephemera,
Welcome to the forums.
I'd have Korg (an authorized service center) repair it.
I'd think that by the time you bought the tools and parts necessary for the DIY, you'd be up to half of the repair charge.

Cheers, Hanon

Jas wrote:the problem is when i switch
Sound in the m50 the fl recieves a command to switch midichannel

Hello Jack,
Turn off the (transmit program change) in the M50.
Global P1: MIDI/ MIDI Routing (uncheck enable program change)
Page 82 of the manual

Cheers, Hanon

I can set up all the other controls just fine through the CC but start/stop/pause/rec all elude me. Hello narcoticrex, The EMX wants System real-time messages for control of the start stop pause functions. System Real-time messages differ from Continuous Controllers (CC#) and from MMC (MIDI Machine ...

If you have ever used an iPad or iPhone then you'll really be able to relate to this. <a href="http://www.buzzfeed.com/burnred/the-25-funniest-autocorrects-of-2011-281t">25 funniest auto corrects of 2011</a> Thanks Pepperpotty, LMAO very funny indeed. Some of those words aren't in my auto correct ...

mansize wrote:hi guys

what do they mean by "ribbon" on the m50?

Hello mansize,
The m50 doesn't have a ribbon controller, but it's sibling instrument, the M3 does.
Cheers, Hanon

Hello rowlando,
Welcome to the forums!
Welcome back to music as well.
Cheers, Hanon

Hello PauloF,
Welcome to the forum!

Hi Jon,
Welcome to the forum!

Hello runningman67,
Welcome to the forum!
Congrats on your Kronos purchase.