Could anybody please tell me how to get a style and/or performance from a floppy onto a flashcard or onto any of the users on the keyboard please? Where can I find instructions for these? Where can I find good instructions for anything concerning the PA80 in a search format on the internet?
I would also like to know how I can edit a style on a user a or flashcard so that it could use a different performance. thank you VERY much!! Smile Very Happy Laughing
HELP Pleeeaaaassee!! Could anybody please tell me how to get
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Hi Omidfull1,
It is an easy process all you need to do is while you have your floppy in the drive you press Disk then Load then you see your Set and then you press open and there you see four folders Global, Performance, Program and Style so from there you open the Style folder there you see User1 User2 and User3 then depending which folder your style is you choose the right User say User1 you will see U1: 1 to 16 and there you choose your desired style and press Load then it asks you to U1: 1 to 16 and you choose your desired area in your User1 area in your Keyboard and you press Load and you are done when you are done you press HD Direct until you see the bottom LED light up and choose the User where you have loaded your Style and Press and select the Style. You would be very happy
Best Regards,
Tariq
It is an easy process all you need to do is while you have your floppy in the drive you press Disk then Load then you see your Set and then you press open and there you see four folders Global, Performance, Program and Style so from there you open the Style folder there you see User1 User2 and User3 then depending which folder your style is you choose the right User say User1 you will see U1: 1 to 16 and there you choose your desired style and press Load then it asks you to U1: 1 to 16 and you choose your desired area in your User1 area in your Keyboard and you press Load and you are done when you are done you press HD Direct until you see the bottom LED light up and choose the User where you have loaded your Style and Press and select the Style. You would be very happy
Best Regards,
Tariq
Could you help me pleeeaaassee...Could you please tell me ho
Could you please tell me how to transfer a different performance onto a style (on the same flashcard or same disk...and from a disk onto the style of a flashcard please, thank you!! 
) 
) ...Basically, how do I match (the voice) a performance with
...Basically, how do I match (the voice) a performance with the style
Well it is a very simple process when you load a Disk or Flashcard it gives you four choices. In the LOAD process it gives you GLOBAL, PROGRAM, PERFORMANCE and STYLE. So you can select only say PERFORMANCE and Load the performance on your existing styles on the Keyboard. Once that is done you can write the desired sounds or drumkit to the style you want to. Same way is the Flashcard .
Regards,
Tariq
.Regards,
Tariq
Hi, Thank you
Could you please give me a step by step for this one like last time please. Thank you Tariq Jan.
Omid Jan,
Step One: Assuming you have already the Set loaded in your Keyboard you take another Disk containing a Set you want to mix you insert it in your lovely Korg Pa80 Disk Drive and go to Disk MENU by pressing Disk. Step Two: you choose from the Disk MENU you choose Load and press it then F1 (that is if you have a Hard Drive installed if not you see FD) and you would see your Whatever.SET there you choose OPEN not LOAD and once you do that you see four lovely folders Step Three: You see GLOBAL, PERFORMANCE, PROGRAM and STYLE from there you Choose PROGRAM or PERFORMANCE and again you press Open not Load !!!!! Step Four: Once you open that folder it asks you BANK.PRF and again you press Open Not Load and you see all your PERFORMANCES like Grand Piano or whatever, there you choose the desired tune or whatever and press load and that is when things get Fun... Step Five: Now it asks where you want to Load the desired tone or whatever and you have to know where you want it in the user area of your Keyboard and Performance area that is. Once you know where you want that desired tone you load it and you are done and you close all the screens and you are Set to Rock . It is very simpe you follow the same procedure when dealing with Korg's lovely 8Mb cards.
Best Regards,
Tariq
Step One: Assuming you have already the Set loaded in your Keyboard you take another Disk containing a Set you want to mix you insert it in your lovely Korg Pa80 Disk Drive and go to Disk MENU by pressing Disk. Step Two: you choose from the Disk MENU you choose Load and press it then F1 (that is if you have a Hard Drive installed if not you see FD) and you would see your Whatever.SET there you choose OPEN not LOAD and once you do that you see four lovely folders Step Three: You see GLOBAL, PERFORMANCE, PROGRAM and STYLE from there you Choose PROGRAM or PERFORMANCE and again you press Open not Load !!!!! Step Four: Once you open that folder it asks you BANK.PRF and again you press Open Not Load and you see all your PERFORMANCES like Grand Piano or whatever, there you choose the desired tune or whatever and press load and that is when things get Fun...
Step Five: Now it asks where you want to Load the desired tone or whatever and you have to know where you want it in the user area of your Keyboard and Performance area that is. Once you know where you want that desired tone you load it and you are done and you close all the screens and you are Set to Rock . It is very simpe you follow the same procedure when dealing with Korg's lovely 8Mb cards.Best Regards,
Tariq
I don't understand
OK, alright. Here's what I exactly want. I want to match a performance on my flashcard WITH a STYLE I have on the same flashcard. Basically, I want to REPLACE the existing PERFORMANCE on a STYLE on the flashcard with a DIFFERENT PERFORMANCE. I.e. I have a style called beat 1...it has Performance "PIANO" to play with it...I would like to change "PIANO" with "GUITAR" let's say Thank you very much )
Thank you very much )