Hon can i enable Hard disk and cd burner in pa1x pro Elite

Ariel · Post by **Ariel** » Mon Nov 12, 2007 1:15 am

HI all .. i have a real problem, i bought a pa1xpro elite but i cant enable cdrw and hard disk too, what i need to make it? i know that pa1xpro elite comes with a hd built in and cdrw too .. but doesn not wotk... Help will be apreciated

karmathanever · Post by **karmathanever** » Mon Nov 12, 2007 1:54 am

Do a complete re-installation of the OS first just in case there is some corruption. Use the "Intro 1" button INSTEAD of "OK" when prompted for the 1st diskette.

You will then need to load the resources file but hopefully you should see your HDD OK first. DON'T FORGET to re-calibrate the touch screen after the OS install...

Let us know how you go - good luck

Cheers

Pete

Ariel · Post by **Ariel** » Mon Nov 12, 2007 5:02 am

How can i load resources??? i did it but icant see hd or cd rw ... is that a serius problem? i need your advice

wittid · Post by **wittid** » Mon Nov 12, 2007 7:20 am

Normally you should be able to make the selection is you go to Disk and then press on the HD Button left low you can change to FD or CD.

There´s normally no need to activate these things seperately - they should work from beginnung on.

Maybe there´s another problem with your key.

cu
Detlef

normally you transfer Ressources via USB to HD and then Restore them there. If that´s not possible you should contact your dealer because i think then there´s something wrong with your key - or you do a operation failure maybe? Where you livin´? Maybe there´s a guy at this forum next to you can help you.