Intrack Sampling Question/Problem

vantripper · Post by **vantripper** » Fri Jan 11, 2008 4:14 am

Hey guys I used the Korg Intrack sampling guide to set up a mic input and see that it was recorded to the track I wanted (15) but even though the levels were perfect before starting I get nothing when I play back my sequencer song. I have put that track on solo as well and still nothing, but the track edit screen shows data?

Any clues? Much appreciated-

Rog

vantripper · Post by **vantripper** » Fri Jan 11, 2008 5:10 am

Just a little more info.

1. The song was created via quick record of a combi A127 - Pointy Ears. There was originally a Drum track on track 15 before I allocated the sample to this track

2. The Sample did record fine - I can hear it in Program mode at INT-E,
User E014

3. When checking under track parameters in sequence mode I still get the drum sound when in track 15. Also this occurs in PO/Seq1 Play with track 15 chosen and I play any key including C3. Also under Program track 15 it shows my sample program location new MS.

How do I get rid of the drums and bring in the multisample.

Thanks in advance!!!

vantripper · Post by **vantripper** » Sat Jan 12, 2008 5:53 pm

Whoops the zone on track 15 was set below the trigger key for the sample. So when I extended the zone across the board wala she worked , even though the drums still play when I touch the keyboard the sample, me singing does play

Korg Forums