Tr piano and sounds question

chilly · Post by **chilly** » Thu Jun 12, 2008 2:41 pm

i have tr76.
1)but where is piano from oasys?
What name of this simple?
2)can i download new sound from internet if i have korg tr, usb cable and computer?

claydodo · Post by **claydodo** » Sat Jun 14, 2008 6:34 am

It seems the EX Multisamples 000-003 are from Oasys (Maybe not the best one on Oasys). Program A001 StereoPiano mf/f is based on these samples. The low and mid notes sound great, but the higher notes above C5 are too thin and weak... I have to adjust the 7-Band EQ to make it proper to my ear...

chilly · Post by **chilly** » Sat Jun 14, 2008 2:20 pm

claydodo wrote:It seems the EX Multisamples 000-003 are from Oasys (Maybe not the best one on Oasys). Program A001 StereoPiano mf/f is based on these samples. The low and mid notes sound great, but the higher notes above C5 are too thin and weak... I have to adjust the 7-Band EQ to make it proper to my ear...

Ohh thank you for the answer.

Very good synthesizer i like it but i need some time to understent how it works.

chilly · Post by **chilly** » Sat Jun 14, 2008 10:42 pm

By the way after long resorches i didn't noticed that EX:000-003 better then Rom:A-Piano
jast thay are different.

But i prefer A-Piano becouse it sounds strong at all notes

claydodo · Post by **claydodo** » Sun Jun 15, 2008 6:47 am

The ROM A-Piano sounds plastic.... EX 000-003 are much much better than it, with great harmonic contents..

You can adjust the EQ for the preset StereoPiano mf/f to make it sound in your favorite way. e.g. see my settings:

http://www.korgforums.com/forum/phpBB2/ ... f05d236490

chilly · Post by **chilly** » Sun Jun 15, 2008 2:26 pm

But i compared both pianos with no eq.

Ok thanks i will try later.

but maby it was so plastic becouse you have not good monitors becouse i use Yamaha MSP5 STUDIO and piano sound good with out eq

claydodo · Post by **claydodo** » Sun Jun 15, 2008 4:49 pm

Do you compare the samples in the initial program D127? If so the a.piano with less high frequency contents may sound more like normal piano.
But a GOOD sample should contain enough high frequency contents so that we can cutoff it at any point we want and give the program enough room for DYNAMIC FILTERING. That may be why sampling is such a difficult job.

chilly · Post by **chilly** » Sun Jun 15, 2008 8:08 pm

claydodo wrote:Do you compare the samples in the initial program D127? If so the a.piano with less high frequency contents may sound more like normal piano.
But a GOOD sample should contain enough high frequency contents so that we can cutoff it at any point we want and give the program enough room for DYNAMIC FILTERING. That may be why sampling is such a difficult job.

No i have created my own program in singel mode with no efeccts, and with no eq.
i only adjasted EG
So i compared both pianos and thay jast sound different, but why i chouse a piano becouse it have strong sound at all keys.

And by the way i like sound of my own created piano with no effects and eq more then program 001A

Today i want to try to add some reverb to it and will see what will happend

chilly · Post by **chilly** » Sun Jun 15, 2008 10:18 pm

I am jast begginer maby i do something wrong but here my senting try to do it

#1

Filter1:
EG: L S:99 A:00 B:00 S:99 R:00
T S:99 D:00 S:00 R:99

AMP1

Lvl: Level:127
Pan: 064

EG: L S:99 A:99 B:70 S:00
T A:60 D:80 S:40 R:88
Basic(in singel mode): Rom A.Piano

All other parameters must be flat
NoEQ no Efeccts

#2

Filter1 and Filter 2:
EG: L S:99 A:00 B:00 S:99 R:00
T A:99 B:00 S:00 R:99

AMP1 and AMP2:

LVL: Level:70
Pan:64
EG: L S:99 A:00 B:00 S:00
T A:99 D:00 S:00 S:80
Basic: OSC1 : EX 002
OSC2 EX 003

All other parameters must be flat

No EQ no Effects!!!!

and this both pianos sound jast different i can't say that some of them sound better or worse jast different but i prefer A.Piano

claydodo · Post by **claydodo** » Mon Jun 16, 2008 9:02 am

Well, it seems that you didn't really CUTOFF anything. Just setting the Filter EG is not enough, you need to set how much this EG applies to the OSC as well. And you also need to set the initial value of the filters: cutoff and reson***ce(Sorry for my poor English). Or you can also try to twist the cutoff knob in Knob Mode A to compare the effect of different cutoff frequency~~

chilly · Post by **chilly** » Mon Jun 16, 2008 10:12 pm

claydodo wrote:Well, it seems that you didn't really CUTOFF anything. Just setting the Filter EG is not enough, you need to set how much this EG applies to the OSC as well. And you also need to set the initial value of the filters: cutoff and reson***ce(Sorry for my poor English). Or you can also try to twist the cutoff knob in Knob Mode A to compare the effect of different cutoff frequency~~

It's ok. i have terable enlish too.

Oh yes, i jast seid that other setting is on flat what means thay doesn't color you sound becouse it will be too long to descreib each parameter.

Jast try my settings and see how it will sound.

Good luck