legacycell-Changing pitchbend range.
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
stuntdouble7
- Posts: 3
- Joined: Thu Jul 10, 2008 8:15 am
legacycell-Changing pitchbend range.
Hello everyone, can someone please tell me how to adjust the pitchbend range in the legacycell.Didnt see anything in the manual
The Legacy Cell isn't an instrument by itself, it's simply a host which hosts the MS20, Polysix, and the MDE FX.
Both the MS20 and the Polysix have bend range parameters, which affect how they are played. You can either go into each instrument in the patch and adjust the bend range on the instruments' front panel, or you can right click on the Cell knobs and choose the "Pitch Bend Range" or each instrument to bring it to the front panel.
But in general, the pitch bend ranges are programmed into the patches just like any other parameter, so if you want to permanently change it per patch, you'll need to resave the patch.
Both the MS20 and the Polysix have bend range parameters, which affect how they are played. You can either go into each instrument in the patch and adjust the bend range on the instruments' front panel, or you can right click on the Cell knobs and choose the "Pitch Bend Range" or each instrument to bring it to the front panel.
But in general, the pitch bend ranges are programmed into the patches just like any other parameter, so if you want to permanently change it per patch, you'll need to resave the patch.
-
stuntdouble7
- Posts: 3
- Joined: Thu Jul 10, 2008 8:15 am
