MicroKorg & MS2000 presets for R3

Cassini · Post by **Cassini** » Thu Sep 11, 2008 1:37 pm

I've copied the Official Radias ports into R3 data.

I have neither a microKorg or MS2000 but apart from the DWGS/PCM differences, LFO phase and waveshaping, TimeKey Changes, Polyphony and patchname size the values are all exact (apart from my mistakes

).

The microKorg copies are initially a little sloppy on the Mono 1/2 front. I have not programmed sequencers for the Microkorg values. Labelling on the microKorg ports is incomplete.

The MS2000 copies are limited by the R3's single sequencer, but I have copied one sequence over.

I've submitted them for upload so hopefully that will occur soon but for now if you want the patches contact me.

Thanks

Cassata · Post by **Cassata** » Sat Sep 13, 2008 11:24 pm

PM sent

whitesong · Post by **whitesong** » Mon Sep 15, 2008 12:42 am

I have sent you a Private Message.

Thanks,
Adrienne

spazmatron · Post by **spazmatron** » Mon Sep 15, 2008 4:10 am

Add another pm to the list.
Thanks for your time and effort! I'm not that great at programming my own sounds, so this is a real treat. Like getting more synths for the same price.

thanks,
shane

Cassata · Post by **Cassata** » Mon Sep 15, 2008 7:56 pm

/me waits patiently....

boxtones · Post by **boxtones** » Tue Sep 16, 2008 12:14 am

sent a pm

Cassini · Post by **Cassini** » Tue Sep 16, 2008 7:04 pm

I've sent the patches out to all those who've requested and to Daz so they should be available to download soon.

Thanks

Daz · Post by **Daz** » Tue Sep 16, 2008 7:21 pm

Thanks Cassini !!

Here is a direct download link for instant gratification

http://www.korgforums.com/support/r3/ca ... for_r3.zip

Cassata · Post by **Cassata** » Tue Sep 16, 2008 9:09 pm

Thank you Cassini!

X-Trade · Post by **X-Trade** » Wed Sep 17, 2008 3:00 pm

I don't know if anyone noticed on the radias convert patches, or on here... but I found that where distortion was on the microkorg, to get the same sound (i had the two side by side for a while), you need to set the depth to 64. on the patches drive was turned on but depth was zero.

conache · Post by **conache** » Wed Oct 01, 2008 8:02 pm

Too much presets to choice!!
Thanks!

Lorenzo42 · Post by **Lorenzo42** » Fri Oct 03, 2008 12:41 pm

Many thanks Cassini for your contribution

roland.19 · Post by **roland.19** » Mon Oct 20, 2008 5:18 pm

K, so I am kind of new to this. I have both Microkorg and R3. I like alot of the sounds on the Micro better, but cannot deal with the tiny keys. The R3 in turn has alot of presets that are better than the Microkorg. I was waiting to test the R3 for a while to decide which one I wanted to keep.

My question is this:

If I install this to my R3, can I decide what it overwrites? No matter what I will have to lose out on some sounds, because the R3 preset will be swapped for the Micro sound, right?

Musicworkz · Post by **Musicworkz** » Fri Oct 24, 2008 11:30 pm

Cassini, thank you. I will play with these this weekend.

Black Talon · Post by **Black Talon** » Thu Feb 12, 2009 9:46 pm

thx man you are the dude

Korg Forums

MicroKorg & MS2000 presets for R3

MicroKorg & MS2000 presets for R3

great work!