From http://www.korguksupport.co.uk/page.cfm?pageid=331
Dont know if this is an late update for the list or a new update for a newer driver?
It doesnt appear in the downloads section though..............
The date on the newest driver in the dowloads section is 12 October 07
19 Dec 2008 - M50 v1.10 software and editor update
10 Dec 2008 - New Firewire Driver for Zero 4, 8 and M3
04 Dec 2008 - MR 2000 owners manual posted
02 Dec 2008 - NANO series owners manuals posted
25 Nov 2008 - PA2x and PA800 v2 now available from www.korgpa.com
14 Nov 2008 - M50 v1.05 software update
30 Oct 2008 - NANO key M1Le software and NANO series Editor
06 Oct 2008 - M50 v1.02 software update and editor update
for Mac and Windows
NEw korg firewire driver zero 4/8/m3
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
NEw korg firewire driver zero 4/8/m3
Last edited by jose b on Tue Jan 06, 2009 10:22 am, edited 1 time in total.
-
RufusWhite
- Posts: 29
- Joined: Sat Aug 30, 2008 4:02 pm
- Contact:
You can get the 1.10 driver from the Korg Japan site, see this thread:
http://www.korgforums.com/forum/phpBB2/ ... hp?t=39093
I've been using it for about a week now with Vista - I was having FW streaming errors like with the XP driver until I reinstalled windows. I don't know if it was the reinstall that did it, or the fact that refreshing Vista allowed it to download the SP1 update, which might also have helped.
Either way, the Zero8 seems to be working pretty stable now, even with Traktor 3.2. My next mission is to try installing Traktor 3.4 alongside it, so that I can try timecode control (which I have working pretty good in TPro, but TPro still has the problems with the rotaries, so that's no-go until that's fixed).
Fus
http://www.korgforums.com/forum/phpBB2/ ... hp?t=39093
I've been using it for about a week now with Vista - I was having FW streaming errors like with the XP driver until I reinstalled windows. I don't know if it was the reinstall that did it, or the fact that refreshing Vista allowed it to download the SP1 update, which might also have helped.
Either way, the Zero8 seems to be working pretty stable now, even with Traktor 3.2. My next mission is to try installing Traktor 3.4 alongside it, so that I can try timecode control (which I have working pretty good in TPro, but TPro still has the problems with the rotaries, so that's no-go until that's fixed).
Fus
Found the proper link for it...
Hi!
I did a bit of snooping out ouf curiosity, and managed to find it...
It was not listed underneath the Zero page, but under drivers:
http://www.korguksupport.co.uk/page.cfm?pageid=464
Far down on the bottom of that page there...
I haven't tried it out myself, but doing a quick analysis tells me that the contents of the UK Support file is the exactly same as the japanese one(verified using MD5 checksums on all the files of the driver), besides the fact that the two documents that accompanied the japanese driver is not included.
Hope this helps you guys on Vista out!
I did a bit of snooping out ouf curiosity, and managed to find it...
It was not listed underneath the Zero page, but under drivers:
http://www.korguksupport.co.uk/page.cfm?pageid=464
Far down on the bottom of that page there...
I haven't tried it out myself, but doing a quick analysis tells me that the contents of the UK Support file is the exactly same as the japanese one(verified using MD5 checksums on all the files of the driver), besides the fact that the two documents that accompanied the japanese driver is not included.
Hope this helps you guys on Vista out!