Transferring O1/W FD sequences to a Triton Studio
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Transferring O1/W FD sequences to a Triton Studio
Just wondering what's the best way, short of recreating them to get 01/W sequences over to a Triton Studio.
1: Connect the 01W to the Triton and midi clock sync the Triton to the 01W.
2: On the O1W SEQ mode, set the track status for each track to BTH
3: SEQ mode on the Triton, turn off the metronome count in so that the sequencer records the second the start button is pressed.
4:Now turn on the Multi Track recording feature on the Triton and press record, then start.
5:When you press start on the 01W now the Triton will record everything at the same time that the 01W sends out.
6: Remap your sounds on the Triton so the song plays back normally.
In addition to that, you are likely going to need to create a few drum kits in order to clone what the 01W was doing.
Regards.
Sharp.
2: On the O1W SEQ mode, set the track status for each track to BTH
3: SEQ mode on the Triton, turn off the metronome count in so that the sequencer records the second the start button is pressed.
4:Now turn on the Multi Track recording feature on the Triton and press record, then start.
5:When you press start on the 01W now the Triton will record everything at the same time that the 01W sends out.
6: Remap your sounds on the Triton so the song plays back normally.
In addition to that, you are likely going to need to create a few drum kits in order to clone what the 01W was doing.
Regards.
Sharp.
<table border="0" cellpadding="0" cellspacing="0" width="530"> <tr> <td rowspan="1" colspan="1" width="267" height="94"> <a href="https://shop.korg.com/kronossoundlibraries"><img name="Image110" src="http://www.irishacts.com/images/Image11_1x1.png" width="267" height="94" border="0" alt="KORG Store - Irish Acts"></a></td> <td rowspan="1" colspan="1" width="263" height="94"> <a href="http://www.irishacts.com"><img name="Image111" src="http://www.irishacts.com/images/Image11_1x2.png" width="263" height="94" border="0" alt="Irish Acts Online Store"></a></td> </tr> </table>
Re: Transferring O1/W FD sequences to a Triton Studio
Welcome pleska, from another who has migrated from the 01/W FD to the Triton Studio... 
BTW, further details on Sharp's helpful advice can be found in your Basic Guide on page 85, which explains the general procedure for simultaneously recording multiple tracks from any external MIDI sequencer.
BTW, further details on Sharp's helpful advice can be found in your Basic Guide on page 85, which explains the general procedure for simultaneously recording multiple tracks from any external MIDI sequencer.
HayHeigh