mini kaoss pad connection

Discussion relating to the Korg KAOSS pads and KAOSS mixers

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
pursix133
Posts: 2
Joined: Mon May 18, 2009 1:21 pm

mini kaoss pad connection

Post by pursix133 »

Hello, I recently purchased a Korg mini-KP and i was curious if it was possible to connect this to a microKORG (or any other type of keyboard).

I have found information about hooking up a KP3 to a microKORG but nothing about hooking up a mini-KP.

Thanks for the help!
salamanderanagram
Senior Member
Posts: 422
Joined: Sun Jul 27, 2008 4:29 am

Post by salamanderanagram »

LOL.
c'mon, is there something stopping you from trying it?
it's an FX box, you can plug whatever you want into it...
TrondC
Full Member
Posts: 238
Joined: Wed Apr 30, 2008 6:52 am

Post by TrondC »

it's the same as with the kp3
-ESX/Machiendrum UW/MonoMachine/Acidlab Bassline/Kaossilator/Gakken SX-150
-Boss DD-6/RV-5/KP3

www.myspace.com/SiestaSubmarina
http://siestasubmarina.bandcamp.com
blitzdj86
Posts: 37
Joined: Fri May 15, 2009 7:08 am

Post by blitzdj86 »

:shock:
pursix133
Posts: 2
Joined: Mon May 18, 2009 1:21 pm

Post by pursix133 »

TrondC wrote:it's the same as with the kp3
well the way they tell me to hook up the microkorg to the KP3 involves MIDI stuff and the mini-kp has no MIDI inputs/outputs.
salamanderanagram
Senior Member
Posts: 422
Joined: Sun Jul 27, 2008 4:29 am

Post by salamanderanagram »

dude no offense, but c'mon.
there's an audio input.
there's an audio output.
is it so hard to understand?
the audio input comes from a keyboard, or whatever.
the audio output goes to speakers.
TrondC
Full Member
Posts: 238
Joined: Wed Apr 30, 2008 6:52 am

Post by TrondC »

pursix133 wrote:
TrondC wrote:it's the same as with the kp3
well the way they tell me to hook up the microkorg to the KP3 involves MIDI stuff and the mini-kp has no MIDI inputs/outputs.
in that case, please let us know if you're looking for midi connections or just audio connection. It's hard to give a good answer if you only give an open question like that. so to rephrase myself: it's exactly the same as with the KP3, minus the midi. hope this helps
-ESX/Machiendrum UW/MonoMachine/Acidlab Bassline/Kaossilator/Gakken SX-150
-Boss DD-6/RV-5/KP3

www.myspace.com/SiestaSubmarina
http://siestasubmarina.bandcamp.com
blitzdj86
Posts: 37
Joined: Fri May 15, 2009 7:08 am

Post by blitzdj86 »

did you RTFM?
q-dancer
Posts: 4
Joined: Mon Jun 01, 2009 10:38 am
Location: Belfast

Post by q-dancer »

salamanderanagram wrote:LOL.
c'mon, is there something stopping you from trying it?
it's an FX box, you can plug whatever you want into it...
im thinking of getting the kaos mini pad would i be able to connect this to my cdm 3600? this might be a stupid question but c'mon im only new
Q-dance!
User avatar
X-Trade
Moderator
Posts: 6490
Joined: Tue Feb 14, 2006 9:47 pm
Location: Leeds, UK
Contact:

Post by X-Trade »

its an audio effects processor - you can process anything that produces a line signal, just connect it to the line-out connections of for example:
- Synthesizer Keyboard (looks great tacked to the right hand side of my TR61)
- Laptop
- PC
- Mixer
- Guitar Amplifier or active preamp guitar
- Other effects units (or for example more Kaoss Pads :) )

then connect the output to your speakers/hifi/recording interface/mixer/whatever you're using...

example connections:
keyboard output > KP > Amplifier
keyboard output > KP > Mixer/Audio Interface > PA
Audio interface out bus (e.g. 3/4) > KP > Audio interface input bus
Mixer alternate out > KP > Mixer input channel (don't switch this channel to alt out:P)
Kaossilator > KP > KP > KP > Headphones

etc....

you will need an adaptor sometimes to connect jack sockets to phono leads... being marketed mainly at DJs, they decided to put phono leads on...
basically you should treat it a bit like a stereo guitar effects pedal or rack unit or anything else of the sort... audio goes in, gets modified, and comes out.

if you connect it to an FX send bus on a mixer, those are usually mono and you will need to switch the KP to send-mode so that it only outputs the wet (modified) signal, not the mix of dry and wet that you get in insert mode. that is because the mixer mixes the FX output back into the mix. the point that it is mono is why i recommend you use the alt3/4 bus on a normal (not DJ) mixer, then you can also switch out which channel(s) you want to route to it.
Current Gear: Kronos 61, RADIAS-R, Volca Bass, ESX-1, microKorg, MS2000B, R3, Kaossilator Pro +, MiniKP, AX3000B, nanoKontrol, nanoPad MK II,
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
salamanderanagram
Senior Member
Posts: 422
Joined: Sun Jul 27, 2008 4:29 am

Post by salamanderanagram »

basically, my opinion is that if you cannot figure out how to attach audio inputs and outputs, you have absolutely no place spending $400 on something you clearly don't know how to use.

it's pretty simple. it's like a VCR, my mom insisted she couldn't hook one up at 35 years old, when i was a little kid i was able to do it in a few minutes.

if you need someone to tell you to put an audio input into the thing that says "audio input" then you are truly and utterly hopeless.

sorry to be harsh, but i can only hold so many hands and this is ridiculous.
Mingyuan
Posts: 5
Joined: Sun Jul 19, 2009 7:32 am
Location: Malaysia
Contact:

Post by Mingyuan »

i'm curious...can a mini kp be used with a bass guitar...? will the low end of the bass tone be remained...?
User avatar
X-Trade
Moderator
Posts: 6490
Joined: Tue Feb 14, 2006 9:47 pm
Location: Leeds, UK
Contact:

Post by X-Trade »

Mingyuan wrote:i'm curious...can a mini kp be used with a bass guitar...? will the low end of the bass tone be remained...?
yes, it is a digital effect processor so it doesn't really impact the sound quality at all. depending on what effect you use.

thing with using it with a guitar or bass though is that you can't just hook it up to the jacks, you need a preamp first so the best place to put it is in the effects loop in your amplifier, or some other similar arrangement. it really depends on your other gear.

also, bass doesn't really benefit from reverb or delay... just makes it muddy. But you can use the flange, distortion etc... Personally I'd want both though and so you'd need two mini-KPs... also the KPs are stereo but almost all guitars and their amplifiers are mono, so you wouldn't benefit from the complete use of the KP.

I'd instead recommend that you invest in a multi-effect pedal. I used to have a Boss GT6B that I used with my bass and it was great, obviously there are more budget models. you can also use them before your amplifier if you wish. or as I often used it, not with an amplifier at all because most bass effect pedals come with a variety of different amp simulations.
Korg also make some great bass and guitar effect pedals in the form of their AX range.
Just have a look at the guitar effects section on their website.
Current Gear: Kronos 61, RADIAS-R, Volca Bass, ESX-1, microKorg, MS2000B, R3, Kaossilator Pro +, MiniKP, AX3000B, nanoKontrol, nanoPad MK II,
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
Mingyuan
Posts: 5
Joined: Sun Jul 19, 2009 7:32 am
Location: Malaysia
Contact:

Post by Mingyuan »

o...thx very much for ur advice...i'm tinking of the same thing 2...
if i wan a multifx bass pedal wif a looper...wat would u recommend then...? (my budget is not high though...)
Post Reply

Return to “Korg KAOSS”