Just for Info, I have the same problem which happened this week end. i got my ms2k for 8 years now.
My ms2k is really slow to change program and do not generate any sound anymore..
When i launch a check with 'ModSequence On/Off' & 3', i get a DSP DRAM - data Err d01014.
i have 2 questions :
did you change your dsp 56362 ? Did it solve your problem ?
Do you think my problem is coming from the DSP too ?
Yes, we changed out that chip. As to whether that's the issue on your system, it's hard to say for sure but it would appear that since it was the culprit on one system, that it's likely (or at least very possible) that it may be on yours as well.
You might try picking up a can of freeze spray and hitting it with that. If the system works temporarily, that would mean that almost certainly that chip is at fault.
I called a French korg support to ask them the question about a change of the DSP56xxx. They told me to be carefull because a microcode could be saved in the memory of the DSP.
Did you changed you ms2000 DSP by a standard 56xxx bought at freescale ?
Did you proceed in that way to solve your problem ?