Korg R3 + Lexicon Lambda

Dj Sa-x · Post by **Dj Sa-x** » Wed Oct 14, 2009 1:30 pm

Hi Everybody,
I'm Using a Korg R3 With Cubase LE 4 and an Audio Controller "Lexicon Lambda".

The Problem is, that I can't record the sound of the Korg on my Computer.
Can somebody explain me how to do it ?

I Plug the Korg in the Input 1 section of the Lambda Controller.

Pleasse hellpp mme !!!!!!!!!

xmlguy · Post by **xmlguy** » Wed Oct 14, 2009 1:38 pm

What do you hear when you plug headphones into the Lambda and then hit notes on the R3?

Dj Sa-x · Post by **Dj Sa-x** » Wed Oct 14, 2009 2:28 pm

There's no sound when I Plug the Headphones

xmlguy · Post by **xmlguy** » Wed Oct 14, 2009 2:37 pm

What do you hear when you plug headphones into the R3 and hit notes? If you get sound, then something is likely wrong with your cabling between the R3 and Lambda or how the Lambda is set to monitor the inputs. There should also be level lights on the Lambda, and if they are dark, then that also indicates a problem with the cabling.

What kind of cable are you using, and where on the R3 and Lambda is it plugged?

If you don't get sound on the R3 headphones, then there's something wrong with the internal configuration on the R3.

Dj Sa-x · Post by **Dj Sa-x** » Wed Oct 14, 2009 2:48 pm

When i plug Headphones into the R3 i Get sound,
It's plugged like this :
R3 ->JACK -> Lambda (Input)

When I Play the R3 and turn the Monitor Mix Button, I Can hear the R3 sounds, and the level indicator works

xmlguy · Post by **xmlguy** » Wed Oct 14, 2009 4:01 pm

Once you know you can hear something from the Lambda monitor, then at this point you've proven that there's nothing wrong on the R3 or it's connection to the Lambda.

Then the problem is with the software configuration of the Lambda drivers or the configuration of the input sources in Cubase. On Cubase you need to create a new audio track and then specify the input from the Lambda, then arm the track for recording/monitoring in Cubase. If you start recording you should see the resulting signal on the Cubase track. If you can't hear it, then that's a separate problem with the audio output configuration on Cubase or you don't have powered speakers hooked up to the Lambda outputs.

Dj Sa-x · Post by **Dj Sa-x** » Wed Oct 14, 2009 8:30 pm

I Install properly the driver on my XP Computer,
but When I follow the step you're saying, there are 2 problems:

Cubase set the Frequency to 44 100Hz and all the sound of my computer (Media player or windows sounds) are Noisy

When I Click on Audio In in the Audio track, there is nothing

xmlguy · Post by **xmlguy** » Wed Oct 14, 2009 9:36 pm

You're still probably having a driver problem. Did you download and install the latest drivers from Lexicon's website? If you have the latest drivers, then you need to follow the Installation Guide to tell Cubase to use the Lambda ASIO driver. The static you hear is probably because Cubase is configured to use the wrong driver.