I am on page 69 of the " microKORG - Owners Manual " document
http://www.korg.com/uploads/Support/mic ... 600000.pdf
And I performed the steps required.
"1 Hold down the SHIFT key and press
the 7 key.
The display will indicate " ."
2 Turn the 1 knob to select the data that
will be restored to its factory-set
condition.
1Program ( ):
Load only data for one program.
Program ( ):
Load data for all programs (128
programs).
Global ( ):
Load global data. (p.58)
To cancel, press the lit SHIFT key.
3 If you selected 1Program ( ) in step
2, turn knob 2 to select the program
(A.11–b.88) that will be restored to its
factory-set condition.
4 ress the blinking 7 key. The Preload
operation will be executed, and the
microKORG will return to its normal
state."
After all that, I get Pcb ("b" looks like f upside down ) blicking in the LED screen.
Does this mean that I am done?
What do I do afterwards?
Factory Reset for microKORG
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
I believe your 'b' is actually a lower case 't'. I think that means that you have write protect turned on.
Current Gear: Kronos 61, RADIAS-R, Volca Bass, ESX-1, microKorg, MS2000B, R3, Kaossilator Pro +, MiniKP, AX3000B, nanoKontrol, nanoPad MK II,
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
Other Mfgrs: Moog Sub37, Roland Boutique JX03, Novation MiniNova, Akai APC40, MOTU MIDI TimePiece 2, ART Pro VLA, Focusrite Saffire Pro 40.
Past Gear: Korg Karma, TR61, Poly800, EA-1, ER-1, ES-1, Kawai K1, Novation ReMote37SL, Boss GT-6B
Software: NI Komplete 10 Ultimate, Arturia V Collection, Ableton Live 9. Apple OSX El Capitan on 15" MacBook Pro
Another problem solved! Thanks X-Trade.
Just for reference for others, this is what I did.
Turn off write protect setting
1. Shift + 8 key
2. Turn knob 1 left to OFF
3. Press 8
Restore the factory settings.
1. Shift + 7 key
2. Turn knob 1 to "Prg"
3. Press 7
Done.
These steps can be found in the microkorg manual (available from the Korg website), Page 69.
Just for reference for others, this is what I did.
Turn off write protect setting
1. Shift + 8 key
2. Turn knob 1 left to OFF
3. Press 8
Restore the factory settings.
1. Shift + 7 key
2. Turn knob 1 to "Prg"
3. Press 7
Done.
These steps can be found in the microkorg manual (available from the Korg website), Page 69.