A very important question, please help !

[vovkung]

Hello everyone!

Sorry for my poor English. I'll try to explain my problem as well as i can)
Not so long ago i bought KORG TRINITY v 2.4.1, and l like this instrument very much. But at least one question is still open for me...
For example, one combination/program is situated in Bank A - 36, but other combination/program in Bank B-48. How can i switch them fast during my play?

Thanks a lot in advance!!!

[Timo]

Hi Vovkung

You can use a Trinity librarian called "Trinitro" to move Programs and Combis so that they are next to each other.

http://www.korgforums.com/forum/phpBB2/ ... hp?t=18508

Make a backup of your current PCG beforehand in case you accidently mess things up and wish to retrace your steps.

[vovkung]

Thanks a lot for the answer, Timo!
I'll use this But if i use at least 5-6 combis in one song, and i need to switch on 4th combi/program in my list after the 1st one, i need to tap value button 3 times?
Early i had casio wk-3500 (sure, i'm not trying to compare with TRINITY))) ). There were some banks and 4 programming buttons for each bank. Every Button contained effect, that i assigned to it. And during play i had an ability to do a "hot call" of necessary program(effect) by pressing one of 4 buttons. How can i realise this using Trinity?

[samriccijr]

Vovkung:

Select Prog/Combi B48

Press Edit Button

On screen - press triangle in top right corner

On screen - press Write Program / Write Combination on screen

On screen - change Bank to "A"

On screen - change Program to "37" NOT 36!

On screen- press OK.

This erases sound in A37 and copies B48 in its place.

Use Value up/down buttons to switch between.

Good Luck!

Sam

[vovkung]

Vovkung:

Select Prog/Combi B48

Press Edit Button

On screen - press triangle in top right corner

On screen - press Write Program / Write Combination on screen

On screen - change Bank to "A"

On screen - change Program to "37" NOT 36!

On screen- press OK.

This erases sound in A37 and copies B48 in its place.

Use Value up/down buttons to switch between.

Good Luck!

Sam

Thanks a lot for the answer, samriccijr
But this is not exactly that i want to do. I have many combis to use in ONE song. For example A001, A002, A003, A004, A005 and A006. And i need to switch very quickly from A001 to A005, then from A005 to A002 and so on. How can i do this? (except taping on value up/down button many times)

[Timo]

Use the keypad? That's what it's there for. Or am I missing something?

For example, one combination/program is situated in Bank A - 36, but other combination/program in Bank B-48. How can i switch them fast during my play?

To move from Combi A-36 to B-48:

• Press Bank once (moves from A to B)
• Press 4 then 8 on the keypad

(For low numbers, for example B9, you also need to press Enter after you've keyed in the number on the keypad)

Or use the touchscreen to open the program/combi browser and select the one you want. Tip: Use the "safety pin" to keep the browser on top of everything else, then you can simply select a combi/program with your finger and keep the browser open for selecting another immediately when needed.

[vovkung]

Or use the touchscreen to open the program/combi browser and select the one you want. Tip: Use the "safety pin" to keep the browser on top of everything else, then you can simply select a combi/program with your finger and keep the browser open for selecting another immediately when needed.

Ohh.... I forgot about "Safety pin". Probably, i was confused a little bit, when i bought this great instrument)))
Genius! THANK YOU VERY MUCH)