HI All ...... I have a Korg pa800 and yamaha psr910.
I have just orderd a bose L1 model 1, I was using two powered amps, I will no longer be able to have the songs set up in sterieo,so now what will I need to do? will I have to change all the songs I have E.Q, as I always pan drums to right bass left etc.what output will I need to use? I will only have two inputs on this system and two mic inputs I do run the mic into the korg key board, but I use to key boards ,so I need to use the inputs for each one of th K.b the korg is only set L R out puts, were as my other key board I use has a RL&L out put . maybe some one can advise me on what to do here? thanks
Paula
bose L1 model 1
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Reuben
- Platinum Member
- Posts: 1619
- Joined: Wed Jan 31, 2007 3:51 am
- Location: Sydney, Australia
- Contact:
Hi,
The L/Mono output will automatically sum the L + R channels provided you have nothing plugged into R so you should run a single lead from L/Mono.
Regards,
John
The L/Mono output will automatically sum the L + R channels provided you have nothing plugged into R so you should run a single lead from L/Mono.
Regards,
John
Free SoundFonts: https://sites.google.com/site/soundfonts4u/
Free high quality Grand Piano for Korg Pa: http://www.korgforums.com/forum/phpBB2/ ... p?t=113029
Free high quality Grand Piano for Korg Pa: http://www.korgforums.com/forum/phpBB2/ ... p?t=113029
mic set up
Hi All,
I have not received the bose L1 model 1 as of yet , in the Bose manual I see it has 2inputs and (2 mic inputs) and also( two mic out puts)in the past I always went directly into mic input 1 on the pa 800, I don't have a lot of knowledge regarding this subject, I would like more control of the vocal volume, so is it possible to go directly to the mic input on the Bose and then use the Bose (mic out put back to the key board?) that way I could control the vocal independently, but would I still be able to use the V.H as I now have it set to follow my cords?
Thanks Paula
I have not received the bose L1 model 1 as of yet , in the Bose manual I see it has 2inputs and (2 mic inputs) and also( two mic out puts)in the past I always went directly into mic input 1 on the pa 800, I don't have a lot of knowledge regarding this subject, I would like more control of the vocal volume, so is it possible to go directly to the mic input on the Bose and then use the Bose (mic out put back to the key board?) that way I could control the vocal independently, but would I still be able to use the V.H as I now have it set to follow my cords?
Thanks Paula