No sounds from Individual outputs 1 and 2

soflames · Post by **soflames** » Wed Dec 22, 2010 7:04 pm

KORG X50 -All the outputs in front and Main outputs at the back are working and I'm getting sound but not from the Individual outputs. What type of jack should I use,I have used one but no sound. Plz help me and describe in details

X-Trade · Post by **X-Trade** » Wed Dec 22, 2010 7:14 pm

Have you actually routed anything to the individual outputs?

They are useful for your own needs but aren't actually configured for use with any of the existing combis.

You just use a normal mono jacklead like you use for the Main Outs.

soflames · Post by **soflames** » Wed Dec 22, 2010 7:19 pm

The same jack that Iam using for Main output is not working on the Individual outputs

X-Trade · Post by **X-Trade** » Wed Dec 22, 2010 7:22 pm

Then you haven't routed anything to the individual outputs.

soflames · Post by **soflames** » Wed Dec 22, 2010 9:29 pm

How to route something in the individual input

Grounded Grid · Post by **Grounded Grid** » Mon Dec 27, 2010 8:00 pm

I'm with soflames.

I'd like to route everything to those ports. I like the idea of fixed volume on them (to go to my soundcard) freeing headphones to change volume.

So can a user make all sounds appear on the "individual" jacks by a global setting?

X-Trade · Post by **X-Trade** » Mon Dec 27, 2010 8:06 pm

No. The 'individual' sockets have to be routed individually for each program.

A good example is where you are recording in the studio and you have an pad with an arpeggiated synth and you want to record them to different tracks by using the alternate outputs.

Or if you are playing live and want to route them out to different channels of a submixer to control the volume/effects/eq of each.

Or perhaps if you want to create a 'quadrophonic' setup

Jonno · Post by **Jonno** » Wed Dec 29, 2010 5:43 am

X-Trade wrote:A good example is where you are recording in the studio and you have an pad with an arpeggiated synth and you want to record them to different tracks by using the alternate outputs.

Or if you are playing live and want to route them out to different channels of a submixer to control the volume/effects/eq of each.

Or perhaps if you want to create a 'quadrophonic' setup

Or when you want to route a click-track to the drummer, but not to the audience.

soflames · Post by **soflames** » Fri Feb 11, 2011 9:55 pm

Thanks X-Trade , I could now route sounds to individual Outputs but there is a problem , i.e. I am only getting right channel sound from both the Individual outputs.How to balance the sounds in Individual output .Plz help in details