2 quick newbie questions iMS-20

loopingstar · Post by **loopingstar** » Sun May 08, 2011 1:51 pm

Just picked up both iMS-20 and iElectribe . Both great fun .
Although a bit daunting at first I've worked out most of the basic features of each but after about 3 hours of head scratching I still can't figure out on the iMS20 ...........
How to assign different functions to the left kaoss pad - other than pan and volume . Also it is possible to make a pattern longer than 16 steps on the iMS20 ?
Thanks in advance if anyone can help . I have to echo what others have said about these products - amazing software , p**s poor manual and tutorials !!

Corbytender · Post by **Corbytender** » Mon May 09, 2011 8:47 am

First question: there's a settings button directly above the left Kaoss Pad. This might be what you're looking for!

Second question: No, but you're given 16 pattern banks easily accessible from the Song/Pattern Component. Copying patterns from one pattern bank to another is super simple. Use the Utility button on the Song/Pattern Component screen.

loopingstar · Post by **loopingstar** » Mon May 09, 2011 7:47 pm

Thanks for the reply, but I tried the setting button . I can select for example x - paramater 1 , y parameter 2 - but along side the actual sides of the pad it say parameter 1 off , parameter 2 off .
Am I making sense - How do I switch them on ? All I want to do is assign the low and mid filter to each one and turn them on . Can't believe how complicated it seems to do this simple thing !!

sabsmoo · Post by **sabsmoo** » Mon May 30, 2011 6:22 am

so from synth screen - slide it down with your finger to expose the 3 rows of 16 knobs. on the left you will see 4 white buttons - select Parameter (these will map to Param1 and Param 2) on your left Kaos.

select values for Channel A + B to the right of the 4 white buttons

easy ey!