I have change my loop on my wavedrum

Discussion relating to the Korg Wavedrum

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

freestok
Junior Member
Posts: 68
Joined: Fri Jul 22, 2011 11:24 pm

Post by freestok »

tobintech

yes we try with someone, the data of oriental on silver don't works fine, many instabilities, slow changing program etc...
I know why, but I can not be discussed here because it is too sophisticated and complicate to explain it.
User avatar
WaveDrummer
Full Member
Posts: 217
Joined: Tue Jan 25, 2011 6:43 am
Location: Connecticut, USA
Contact:

Post by WaveDrummer »

No need to apologize for your English, freestok. It's fine!

This is a wonderful contribution to the Wavedrum community.

I've been pushing for some type of external USB or SD card access for some time now. I hope the work you are doing will further that argument.

Keep it up.

Thanks!
Bertotti
Platinum Member
Posts: 3384
Joined: Sat Jul 10, 2010 4:37 pm
Location: Middle of nowhere

Post by Bertotti »

try this link. A ribbon cable should be easy to fabricate.
Mouser electronics micro sd readers
freestok
Junior Member
Posts: 68
Joined: Fri Jul 22, 2011 11:24 pm

Post by freestok »

Thank WaveDrummer
you are welcome :wink:

Bertotti
your link is interesting, but i still say it's very hard for build it
the problem is not to find a reader case... the problem is to find the fake card for make a contact to the ribbon,
because i don't want to make a soldier directely on a main board electronic, it's very critical works, and the contact is very smal and tight between them...if case of a short circuit with a only one contact can be destroy the WD and cause an irreversible dammage ...you see ?.
Bertotti
Platinum Member
Posts: 3384
Joined: Sat Jul 10, 2010 4:37 pm
Location: Middle of nowhere

Post by Bertotti »

I've soldered smaller and still might try. I would rather find an encased reader so it would be easier to mount. I agree the soldering is small and I will see if any of my normal sources has a micro sd card to ribbon.
User avatar
springvloed
Posts: 16
Joined: Sun Apr 03, 2011 11:54 am
Location: netherlands
Contact:

Post by springvloed »

Can we also back up settings, or does the micro card only hold the sounds?
freestok
Junior Member
Posts: 68
Joined: Fri Jul 22, 2011 11:24 pm

Post by freestok »

springvloed

i don't try it but look that

Image

you can see on this picture, you have a file named "USER.BOR"
i 'm not shure, but i think is the file contain the user setting

for verified that, it's simply,
you make a backup on your computer,
after this backup, you build a programme user with your wavedrum and save it,

you make a another backup with this new user programme sound inside.

and you replace the first original backup on MICRO-SD-CARD (this first backup not have a new user feature)

and finaly, after all,
check in your wavedrum if the new "user programme" create rather have disappeared, in this case, it can be concluded that the one file on a SD-CARD contain all USER Programme saved.

it's logical and easy to try it.
WaterDrum
Senior Member
Posts: 340
Joined: Fri Apr 01, 2011 9:38 am
Location: 3rd Stone from the Sun , Bavaria

Post by WaterDrum »

very easy to backup

a complete backup of the card is less than 300kB
User avatar
ak
Approved Merchant
Approved Merchant
Posts: 497
Joined: Sun Mar 06, 2005 6:05 pm

Post by ak »

For your info.Everything is on the Micro-SD card! :lol: :lol: :lol:

Even the WD samples....
http://www.kelfar.net

<a href="https://www.korg.com/Services/kronos_re ... tabsKELFAR" target="_blank">KELFAR SOUND LIBRARIES @ Korg Shop</a>
<a href="http://kelfar.net/KronosSounds.htm" target="_blank">KORG KRONOS SOUND LIBRARIES</a>
<a href="http://kelfar.net/prod08.htm" target="_blank">Korg M3 World Music Set</a>

Image Image Image

Korg M3 and Kronos
Bertotti
Platinum Member
Posts: 3384
Joined: Sat Jul 10, 2010 4:37 pm
Location: Middle of nowhere

Post by Bertotti »

How about this Freestok, looks like 20pcs to a lot min order is one lot. I bet we could come up with 20 people looking for one of these if it is the right one.

maybe this would do
WaterDrum
Senior Member
Posts: 340
Joined: Fri Apr 01, 2011 9:38 am
Location: 3rd Stone from the Sun , Bavaria

Post by WaterDrum »

I need to correct myself

a complete backup is of course less than 300 MegaByte (not kB) :wink:

@kelfar : can you read the samples ?? and how ??
User avatar
aminco
Posts: 19
Joined: Thu Jul 15, 2010 6:12 am
Location: San Francisco, CA
Contact:

Post by aminco »

Freestok, you made my day! I can use my own loops in my WD - joy joy!
Much respect!

I'm not sure how to organize a group buy over several continents (I'm in the Middle East myself), but I would love to have 4 of these extender babies for my two WDs and for backups.
Bertotti
Platinum Member
Posts: 3384
Joined: Sat Jul 10, 2010 4:37 pm
Location: Middle of nowhere

Post by Bertotti »

Here it is on the right page. A bit over 127 bucks shipped to the US for 20 pieces. That s a bout 6.40 US each not counting shipping to where they need to go.I haven't the cash at the moment to buy a lot but if you all can wait till next year I will buy a lot and sell at cost plus shipping to whereever you are, as long as e ar allowed to ship there. I understand there are a few places we can't ship.

looks good
User avatar
PianoManChuck
Platinum Member
Posts: 832
Joined: Tue Aug 09, 2011 10:14 pm
Location: Los Angeles, CA
Contact:

Post by PianoManChuck »

WOW! I was impressed with the Wavedrum, but also disappointed that it could never be changed. You (Freestok) have breathed new life into the Wavedrum. You have transformed the Wavedrum into what it should have been in the first place! You are a true pioneer.

I hope Korg does NOT hire you... if they did, we would never know about things like this! Bravo!!
User avatar
aminco
Posts: 19
Joined: Thu Jul 15, 2010 6:12 am
Location: San Francisco, CA
Contact:

Post by aminco »

When developing any products , you have to make compromises. Leaving the I/O out is a logical decision. Glad they didn't bury the memory in plastic.
Post Reply

Return to “Korg Wavedrum”