Problem Reading Pa800 files onto Pa3x! Please Help!

daghum · Post by **daghum** » Sat Sep 03, 2011 12:45 pm

Hi

Pa3x reads the files of (Pa800), but the resulting sounds are incorrect with extra unneeded sounds. Especially in "User DK".

I Hope to not waste four years of the tire on My Pa800!
Any Help Please?!

Thank You.

daghum · Post by **daghum** » Mon Sep 12, 2011 1:58 am

Embarrass a lot of answers!

karmathanever · Post by **karmathanever** » Mon Sep 12, 2011 8:00 am

Remember that SOUNDs from your PA800 are SOUND configurations only - no multisamples are changed or loaded so, as the PA3X has a different sound engine you may notice differences. If you have customized the multisamples, user samples etc... then you must ensure they are also customized on the PA3X the same.

First, I suggest you check the SOUND configuration of one of these SOUNDs and see if it matches the PA800 - this should give you some clues as to why some of your SOUNDs are not as you expect.

Cheers

Pete

daghum · Post by **daghum** » Mon Sep 12, 2011 11:34 am

Thank You very much karmathanever!
When loading Pa800 (.SET), all samples, multisamples are loaded to Pa3x.
I found them in the Sampling mode, (after pressing "Record' in "Sound" Page.
But some keys haves double soundes! I mean: pressing some keys will play tow or more samples together.

I've loaded the same (.SET) on another Pa3x, and it worked fine.
The problem was in my Pa3x RAM.

Anyway, my local distributor promises to send me a new (RAM) may be today or tomorrow. Many Thanks to Eddie Kana'an (KORG, Lebanon) for helping me, and to "Saulo Valerio", the Product Support Specialist in "KORG UK LTD" for his kind cooperation.
And special thanks to you dear karmathanever

Korg Forums

Problem Reading Pa800 files onto Pa3x! Please Help!

Problem Reading Pa800 files onto Pa3x! Please Help!

Thanx!