Korg Zero 8 MIDI functions feedback with Traktor 2 PRO (LED)

Discussion relating to the Korg D-series digital recoders, MR-1/MR-1000 mobile recorders and Zero4/8 mixers

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
amarillis
Posts: 9
Joined: Sat Nov 14, 2009 4:22 pm

Korg Zero 8 MIDI functions feedback with Traktor 2 PRO (LED)

Post by amarillis »

Hi there all.
I'm using this beast (Zero 8) to control Traktor 2 PRO via MIDI, using a personal mapping.
Everything is working fine but the LEDs on the Zero. I'm not able to turn them ON or OFF when for example I use the mouse to switch ON the Monitor Cue for one channel from the Traktor UI.
So the question is: is there a way to send some OUT command to the LEDs on the Zero to have a visual feedback of what is going on in the Traktor UI? Does the LEDs strip near each volume fader works in MIDI mode or only in AUDIO mode?

I'm also using an XPONENT as a controller withe the Zero and Traktor 2 PRO and when I send an OUT MIDI command to its LEDs (Cue Point, LOOP, Channel Level Meter....) they turn ON and OFF as a XMas tree....

Thanks to everyone in advance.

Alberto
Top
amarillis
Posts: 9
Joined: Sat Nov 14, 2009 4:22 pm

Post by amarillis »

So, after almost a month from my first post, I can say THANK YOU for all the support and the help you gave me.

Alberto
Top
Post Reply

Return to “Korg Digital Recording and Mixing”