New Trinitro problem

Discussion relating to the Korg Trinity and TR rack.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

synthjoe
Platinum Member
Posts: 1011
Joined: Wed Apr 21, 2010 12:41 am

Post by synthjoe »

Adrian,

I'd check two things:
1. setting of Trinitro (to make sure it is set for a TR-Rack - under 'View/Options...', also banks and stuff in 'Tools/Edit...' once you have a project open, but it should be OK for new projects if the former is set correctly)
2. make sure that your MIDI interface can handle long SYSEX messages (do a full dump into MIDI-OX, for example and then load it back)

Some USB MIDI interfaces can fail on long SYSEX streams - even though you did not mention whether or not you have an USB interface.
Adrian4u
Posts: 38
Joined: Tue Oct 02, 2007 12:02 am

Post by Adrian4u »

For now I use Behringer BCF & BCR 2000, and with Triton there's no problem.
I also have MOTU 838mk3 (use with Korg Z1)

In TRINITRO it looks like "download all" (All, Global, ALL PROG or ALL COMBI) goes, but stops suddenly in the end - with communicate that "no response" or something like this....

Moreover - no matter if I'll set up compatibility mode (Win7/64) to Win95, Win98 or Win XP - theres always ERROR communicate when I quit program, and in Task manager it seems that Trinitro is still running.



I have transmission problem with MidiQuest too.... but in this case - everything looks fine, but even after full download, when I want to go into program/combi edition, there are no data and program asks for another dump.
Phenom II x6 1100T (OC to 6x 4,1gHz), 8gB DDR3/1333gHz RAM, Win7/64; Korgs: Z1, MicroX, M50, Triton Rack; NI Maschine; Behringer BCF2000, BCR2000; MOTU 828mk3 FW; Edirol Edirol UA-1000; guitars: Cort Z-Custom, LAG JET100 totally customed, Cort SFX-DAO; some other music toys, one very musical cat
synthjoe
Platinum Member
Posts: 1011
Joined: Wed Apr 21, 2010 12:41 am

Post by synthjoe »

I had similar problems when my MIDI interface input port slowly died on me. Maybe you should try a loopback test (by plugging MIDI interface IN cable into the Trinity's THRU port) to verify whether data flows fine both directions.
syah
Posts: 9
Joined: Tue May 01, 2012 5:07 pm
Location: Netherlands
Contact:

Post by syah »

Help needed too!

I just recently bought a TR Rack and I got Midi Quest getting all patches. I then decided to use the "mix" function to create new presets. When I click on them, some of them are "put" to the memory of the TR just fine. But other make my TR crash (freeze). I have to reboot to get it working again. Does anybody know which parameters can cause such a crash?
User avatar
Spacecowboy
Full Member
Posts: 152
Joined: Mon Nov 26, 2007 5:58 am
Location: Atlanta, ga. USA
Contact:

Post by Spacecowboy »

you should be able to fit more songs too. i think i gathered a bunch at one time and dragged them to one and loaded em so i could hear them all.

i have every song ever put out also. any thing from eagles to techno. i think about 30 or so. i have the moss sng's too altohugh there arent many of those.

of course most take a standard PCG but not all, but most actually do. at least the ones made early on. even the pink floyd PCG only had a handful of different patches.
Korg Trinity Pro 4 DW8000's Access virus KC Roland G8 2 Yamaha ex5's Korg poly 61 Soon to have a Prologue
variant966
Posts: 23
Joined: Mon Aug 22, 2011 4:37 pm
Location: Russia

Post by variant966 »

I had this problem. Solution: download the same program. If you want to load combination, you must first load the program, which consists of the combination. And then - the very combination.
Good luck!
Post Reply

Return to “Korg Trinity”