Problem loading PA2x Set in PA3X

ova · Post by **ova** » Thu Jan 26, 2012 6:30 pm

Hi everybody,

I loaded my set from PA2X into the 3X, but the user sounds sound mixed, missing parts, samples not at the right places...
I have 256Mb installed on the 3X and the set is a bit less than 256Mb.
Tried to load the PCM alone, wiped off the battery charge and reinstalled the set, but the samples do not sound right. Deleted all samples and reloaded PCM, and than the set...
Could you please advise what to do.

Thanks

ova · Post by **ova** » Thu Jan 26, 2012 7:45 pm

Problem SOLVED!

I reinstalled the memory card and that did it!

medyumau · Post by **medyumau** » Mon Feb 27, 2012 4:01 am

ova wrote:Problem SOLVED!

I reinstalled the memory card and that did it!

I have the same problem here with pa3x sounds are mixed and not loading properly. Can you help me to solve this please, what do you mean by re-installing the memory card? Do you mean re-installing the OS ? or making a Factory Reset? i tried both and didn't work, please help me..

ova · Post by **ova** » Mon Feb 27, 2012 4:39 am

I removed the RAM (memory card), cleaned the connectors with bottled compressed air, and re-installed the RAM, that is it.

medyumau · Post by **medyumau** » Mon Feb 27, 2012 4:58 am

thanks, that was really fast reply

I think my problem is different since this is very new keyboard, 1 week old pa3x.