POLL: how many exprienced m50 freezing?
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
I've seen problems like this in many keyboards, and I'm not much into forums... but I do recall Alesis having problems with Fusion and Andromeda, Roland having problems with the XP keyboards, and more recently and notably, the Juno G's, etc.
People panic and is understandable to some degree.
I would recommend the M50 too. Just try to get it from a trusty source.
People panic and is understandable to some degree.
I would recommend the M50 too. Just try to get it from a trusty source.
I had one freeze about five months ago, and I am an 88'er. However, it has not happened since.....I think it was because it was on for a long time before I played it (8 or 9 hours).
Korg M50-88 with Dell Inspiron 14 7000, Windows 8.1, 8 GB RAM, up to 3.0GHz Intel i7 Processor. Sony Acid Music Studio 10.0. USB-A to B and Yamaha UX-16 MIDI Interface.
-
- Posts: 1
- Joined: Sat Mar 17, 2012 7:39 pm
-
- Platinum Member
- Posts: 522
- Joined: Tue Jun 30, 2009 11:28 pm
Mine started freezing 45 days ago, after 2 years of very light use and care.
While frozen, buttons don't work, etc. I have to turn it off and on and yesterday, I've got the message of "updating panels".
I have a Yamaha FC-7 Expression pedal and a Korg sustain pedal plugged in: unplugged both and, sometimes freezes, sometimes not.
Never ever happened with the X5, X5D and CX-3.
While frozen, buttons don't work, etc. I have to turn it off and on and yesterday, I've got the message of "updating panels".
I have a Yamaha FC-7 Expression pedal and a Korg sustain pedal plugged in: unplugged both and, sometimes freezes, sometimes not.
Never ever happened with the X5, X5D and CX-3.
Current gear
Korg M50 / Korg Nanokontrol 2
Past gear
Teisco Organ / Yamaha Electone / Casio CZ-230S / Casio CZ-3000 / Ensoniq ESQ 1 / Ensoniq SQ1 / Ensoniq SQ1 Plus / Ensoniq SD-1 /Yamaha PSR? / Hammond XM-1 / Roland RS9 / H&K Rotosphere / Yamaha S80 / Korg X5 / Kurzweil ME-1 / Korg X5D / Korg CX-3 (V2) / Hammond M111 & Leslie 147
Youtube channel
http://www.youtube.com/user/bubusdeoliv ... sults_main
Korg M50 / Korg Nanokontrol 2
Past gear
Teisco Organ / Yamaha Electone / Casio CZ-230S / Casio CZ-3000 / Ensoniq ESQ 1 / Ensoniq SQ1 / Ensoniq SQ1 Plus / Ensoniq SD-1 /Yamaha PSR? / Hammond XM-1 / Roland RS9 / H&K Rotosphere / Yamaha S80 / Korg X5 / Kurzweil ME-1 / Korg X5D / Korg CX-3 (V2) / Hammond M111 & Leslie 147
Youtube channel
http://www.youtube.com/user/bubusdeoliv ... sults_main
-
- Posts: 1
- Joined: Mon Apr 02, 2012 8:01 pm
Problem
Same problem here. M50-61 S/N 4006. I had it since 2009, just got the problem recently.
Freezing
I've had my M50-73 for almost 3 years. About a year ago it started locking up once in a while. A few weeks ago it became more frequent. Now it freezes about 2 minutes after power up (every time).
Serial number is 221.
Serial number is 221.
Last edited by JohnnyL on Tue Apr 10, 2012 5:26 pm, edited 1 time in total.
Best Regards,
JohnnyL
JohnnyL
you may try the following:
- hard reset (do a backup of .PCG file if you have custom program/combi or custom global setting) - somewhere in the M50 sub-forum there is the combination of keys to be pressed to do hard reset (sorry i do not remember it on the fly)
if hard reset do not solve the issues (very likely this won't solve the issue):
- re-install from scrath the latest OS
if alsi this won't work (very likely, i am sorry):
- bring your M50 to authorized korg repair center; usually the issue is solved either replacing the motherboard or replacing two capacitors or if you're lucky replacing the whole M50
- hard reset (do a backup of .PCG file if you have custom program/combi or custom global setting) - somewhere in the M50 sub-forum there is the combination of keys to be pressed to do hard reset (sorry i do not remember it on the fly)
if hard reset do not solve the issues (very likely this won't solve the issue):
- re-install from scrath the latest OS
if alsi this won't work (very likely, i am sorry):
- bring your M50 to authorized korg repair center; usually the issue is solved either replacing the motherboard or replacing two capacitors or if you're lucky replacing the whole M50
-
- Posts: 1
- Joined: Fri Apr 13, 2012 8:38 am
- Contact:
KORG M50 FREEZE PETITION!
If you think KORG should fix the M50 freeze for free, please sign the petition.
http://www.thepetitionsite.com/522/075/ ... free/#sign
http://www.thepetitionsite.com/522/075/ ... free/#sign
- michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
I one time had not a freeze (never had a freeze) but the touch display did not work (might be the problem of the panel error described above).
Solution: open the M50, disconnect connectors from/to the panel display and reconnect them again. Of course only do this if you feel comfortably opening up the M50.
Takes about half an hour and never had a problem since (even after lots of movement).
Solution: open the M50, disconnect connectors from/to the panel display and reconnect them again. Of course only do this if you feel comfortably opening up the M50.
Takes about half an hour and never had a problem since (even after lots of movement).

Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
- michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
Good point yes.csteen wrote:Also Remember that opening up your M50 voids it's warranty so be sure your warrenty has expired prior to doing so.

Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
The results of the poll are concerning: 43 people experience freezing, vs 53 who do not. Even accounting for bias, that's a huge percentage.
Current Equipment:
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One
- michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
It depends ... like any poll, people having problems are expecting to react faster or at all than those who never had problems ... they might not even look at KorgForums.

Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
- Xx_Joey_xX
- Full Member
- Posts: 176
- Joined: Thu Dec 28, 2006 6:13 pm
- Location: Detroit USA
Mine is the KORG PA3X 61
SHARP
When you say internal memory stick ?
what do you exactly mean ?
is that under the keyboard where the HD goes ?
the factory one is 4 gigs i think, I replaced it with a 16 gig version.
It would boot maybe %25 and it would freeze
I tried everything reinstalling the OS, factory resources you name it.
It was the KORG AUTHORIZED tech that told me its the main board.
another problem is the PAS would not work, I tried two different PAS speakers they both did not work, So that's why i believed it was the MAIN BOARD.
Please Advice.
Thanks
SHARP
When you say internal memory stick ?
what do you exactly mean ?
is that under the keyboard where the HD goes ?
the factory one is 4 gigs i think, I replaced it with a 16 gig version.
It would boot maybe %25 and it would freeze
I tried everything reinstalling the OS, factory resources you name it.
It was the KORG AUTHORIZED tech that told me its the main board.
another problem is the PAS would not work, I tried two different PAS speakers they both did not work, So that's why i believed it was the MAIN BOARD.
Please Advice.
Thanks
pLaY yOuR wAy tO tHe nExT lEveL