MS-20EX and the PolysixEX Tone Adjust Tool

dongfang · Post by **dongfang** » Mon Feb 18, 2013 8:40 pm

Hi,

Something completely different

While working with the PolysixEX and MS-20EX, I like to turn real knobs to change the settings of the VCO, VCF, EG, etc.
However, as a beginner I can never remember what is what.
Therefore, I've created the MS-20EX Tone Adjust Tool and the PolysixEX Tone Adjust Tool.
Now you can listen to the sound you create and turn real knobs!

Instructions are in the document at:
http://www.dfsxpertsys.com/kronos/MS-20 ... stTool.zip

I hope you can use it.

MarPabl · Post by **MarPabl** » Mon Feb 18, 2013 9:52 pm

Thank you

Neat idea

BobTheDog · Post by **BobTheDog** » Mon Feb 18, 2013 9:59 pm

What does it do?

Ojustaboo · Post by **Ojustaboo** » Tue Feb 19, 2013 12:23 am

Excellent, very simple idea and very effective.

Thanks.

Ojustaboo · Post by **Ojustaboo** » Tue Feb 19, 2013 12:25 am

BobTheDog wrote:What does it do?

It's a PDF containing two different pics to cut out and place over the buttons/sliders on your Kronos so that you know at a glance what they're controlling.

BobTheDog · Post by **BobTheDog** » Tue Feb 19, 2013 7:35 am

Thanks for the info.

Corgy · Post by **Corgy** » Tue Feb 19, 2013 8:47 am

Thank you,

easy to install and very helpful

Sparker · Post by **Sparker** » Tue Feb 19, 2013 1:43 pm

Dongfang: Great Idea and much appreciated - that will save me digging out the Tone Adjust diagrams for these engines

Will you be doing more for the other engines?

dongfang · Post by **dongfang** » Tue Feb 19, 2013 2:11 pm

Hi all, thanks

Installation is easy, and It's working with OS 2.0 and higher

@Ojustaboo, thank you for the explanation.

Please see the pictures in the pdf file.

@Sparker: Yep, when I start to explore the other engines, I will create similar 'tools'.

drama1 · Post by **drama1** » Tue Feb 19, 2013 2:58 pm

This is sooo cool

jimknopf · Post by **jimknopf** » Tue Feb 19, 2013 6:54 pm

What a great idea!

Thanks for posting!

macroenie · Post by **macroenie** » Tue Feb 19, 2013 7:12 pm

Great idea, thanks a lot!

ksi · Post by **ksi** » Wed Feb 20, 2013 7:42 am

Thanks a lot for sharing - a great idea!

AdDeRoo · Post by **AdDeRoo** » Wed Feb 20, 2013 9:42 am

Thanks a lot indeed. I printed them yesterday and tried them, but apparently indeed my printer messed up the size, so the result was too small.

While printing, make sure indeed the doc is not fit to the paper size, but keep the original size.

Should have read the 1st page better....

1jordyzzz · Post by **1jordyzzz** » Wed Feb 20, 2013 12:16 pm

THIS IS SOO COOOL !!!

Thanks a lot