Kaossilator 2 Output problem

Wolfillo · Post by **Wolfillo** » Wed Jul 10, 2013 3:44 pm

Hi! I have some troubles with the Kaossilator 2 output. When I plug the minijack to it from an external speaker it still sounds inside the kaoss. If I unplug(to make "better" contact) it a little it starts to sound for a few seconds and then continues to sound in the internal speaker. I think I will open it tomorrow but I want to know if that has happened to someone.
Thx!

Wolfillo · Post by **Wolfillo** » Fri Aug 23, 2013 6:49 pm

Wow thanks for answering...the problem is still on but it only happens when I plug it to an external speaker, not to the headphones...

Bald Eagle · Post by **Bald Eagle** » Fri Aug 23, 2013 7:04 pm

They are built cheap. I had to replace one after a short time because it wouldn't power on. Open it and check for loose connection.

argento · Post by **argento** » Sat Aug 24, 2013 5:00 pm

Maybe you can try a test program on your Kaossilator 2, then maybe its good to try an old version 1.08 firmware uppdate to check if the problem is software or hardware. In the Korg site i think you can download 1.08 and 1.10 version firmware to check yoiur KO2 properly. See my posts.