M3-M+ pa3x
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
M3-M+ pa3x
hi
how can i control m3-m with pa3x? what to do so that i can play sound from m3m and sometimes from pa3x?
i connected midi-out in p3x to midi-in in m3m
but when i play so i can hear sound from both pa3x and m3.
how can i control m3-m with pa3x? what to do so that i can play sound from m3m and sometimes from pa3x?
i connected midi-out in p3x to midi-in in m3m
but when i play so i can hear sound from both pa3x and m3.
- Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
There are several ways to go about it but you need to connect the audio outputs on both to something.
You could connect both the M3 and PA3X to a mixer or audio interface and then send the mixer/interface output to monitors or a DAW.
If you don't have a mixer available you can route the audio from one board into the other. You could connect the M3 main audio outs back to the audio inputs on the PA3X or go the other way and connect the PA3X audio outs to the M3 audio in. Either way you are using one of the boards as the mixer.
I believe that the PA3X has SPDIF digital outputs. The M3 has SPDIF inputs so if you are going to run the audio into the M3 you could go digital.
You could connect both the M3 and PA3X to a mixer or audio interface and then send the mixer/interface output to monitors or a DAW.
If you don't have a mixer available you can route the audio from one board into the other. You could connect the M3 main audio outs back to the audio inputs on the PA3X or go the other way and connect the PA3X audio outs to the M3 audio in. Either way you are using one of the boards as the mixer.
I believe that the PA3X has SPDIF digital outputs. The M3 has SPDIF inputs so if you are going to run the audio into the M3 you could go digital.
thank you bro i could fix it but i have another question.
i bought a used m3 and when i try it so i could see that i must load ksc after every time i switch off the device and when i asked the seller he told me that all m3 are like that.. but i read somewhere in the forum that someone hade the same problem so what to do?
i bought a used m3 and when i try it so i could see that i must load ksc after every time i switch off the device and when i asked the seller he told me that all m3 are like that.. but i read somewhere in the forum that someone hade the same problem so what to do?
- Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
- Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
Yes, the samples from Korg that you can load in Media mode. Korg had 4 of them and if the M3 finds them on a USB drive they will show on the EX-USB PCM tab in media mode. You can download them from the Support section on the Korg website. Look in he Soundware subsection.
There are also some links there to other sites where you can purchase some additional samples and Programs/Combis. I purchased some combi sets from karma-lab.com. They are very good and make excellent use of Karma.
There are also some links there to other sites where you can purchase some additional samples and Programs/Combis. I purchased some combi sets from karma-lab.com. They are very good and make excellent use of Karma.
- Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
You should do a factory reset to restore all original programs and combis. Go to Global Mode. Then select Load Preload/Demo Data. Then select "All (Preload PCG and Demo Songs).
This wont load any sample data. If you want the piano samples you will need the EXPCM01.KEP file and it has to be loaded at startup. If you have the XPanded version of the M3 this file should already be on the internal SD card so you shouldn't have to do anything. If you have the original version you will need this file on a USB drive when the M3 starts.
I'm assuming you have OS v2. If you have v1 you wont need the EXPCM01.KEP file at all.
This wont load any sample data. If you want the piano samples you will need the EXPCM01.KEP file and it has to be loaded at startup. If you have the XPanded version of the M3 this file should already be on the internal SD card so you shouldn't have to do anything. If you have the original version you will need this file on a USB drive when the M3 starts.
I'm assuming you have OS v2. If you have v1 you wont need the EXPCM01.KEP file at all.
- Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
Yes ... I believe I have answered your question yet you keep repeating the same thing. I'm sorry I was unable to help but I guess I don't understand what you are asking. Perhaps someone else can help.kardo wrote:Do you mean the piano and the other sound that u can load from media mode?
Are there any orginal set for m 3? The sellee had load his own sound to all bank do now i dont have any orginal sound