Hey all!
Does this software do something I cannot achieve with my EMX alone (with more work ofcourse)?
Electribulator - Software to enhance sounds of electribe EMX
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
... reread the description it should help you understand that the software does more than simply make polyphony with remote midi sequencer...Hi,
It's been a long time, but I've created a facebook page for those who prefer to use facebook.
Here's the page.
It's been a long time, but I've created a facebook page for those who prefer to use facebook.
Here's the page.
Last version with minor bugfixes for Mac users (not tested) :
https://renaud.warnotte.be/Projects/Ele ... _0_2_2.zip
https://renaud.warnotte.be/Projects/Ele ... _0_2_2.zip
Bug that caused the sound to be distorted seems fixed.
Redownload the version 0.2.2 in order to try. Also a fix in preset list causing a bug in mac os.
https://renaud.warnotte.be/Projects/Ele ... _0_2_2.zip
Redownload the version 0.2.2 in order to try. Also a fix in preset list causing a bug in mac os.
https://renaud.warnotte.be/Projects/Ele ... _0_2_2.zip
-
gilesindisguise
- Posts: 23
- Joined: Tue Aug 17, 2010 9:38 pm
A latest version having month but I forget to share here : http://renaud.warnotte.be/Projects/Elec ... _0_2_3.zip
I don't know if you miss something, I'm not at your room ^^
The first thing to be sure at first is if your midi channel on the electribe are the same as the config of electribulator. It can be changed but by default synth are on MIDI Channel 1-5 and DRUM is on channel 10.
Then you must be sure to configure correctly the input and output when launching the software :
1) The midi input where your alesis is connected.
2) The midi output to the emx.
3) And optionnal midi input for control (you could use a dummy one, try to not use same as the 1st midi input).
After, the first test to make is to check if the midi output of electribulator is working fine. For that, just click on the button (top right) called Send midi demo to electribe. That should make the electribe playing some octave notes.
If you hear the notes. It's ok on the input part.
But to check if input is working it's another problem... (It made me thing I should add something somewhere to show when a note is pressed on the input).
) you can perhaps use the Arpegiators tab (and select the checkbox enable arp), normally it should react and change the background color to green showing it reacts to input.
In case of doubt you can also install a virtual midi cable (like LoopBe1) and try with another software sequencer or the tonelike tools that comes with electribulator.
You can also set the output to the general midi device instead of electribe to avoid some other potential problems.
I hope it helps, tell me...
The first thing to be sure at first is if your midi channel on the electribe are the same as the config of electribulator. It can be changed but by default synth are on MIDI Channel 1-5 and DRUM is on channel 10.
Then you must be sure to configure correctly the input and output when launching the software :
1) The midi input where your alesis is connected.
2) The midi output to the emx.
3) And optionnal midi input for control (you could use a dummy one, try to not use same as the 1st midi input).
After, the first test to make is to check if the midi output of electribulator is working fine. For that, just click on the button (top right) called Send midi demo to electribe. That should make the electribe playing some octave notes.
If you hear the notes. It's ok on the input part.
But to check if input is working it's another problem... (It made me thing I should add something somewhere to show when a note is pressed on the input).
) you can perhaps use the Arpegiators tab (and select the checkbox enable arp), normally it should react and change the background color to green showing it reacts to input.
In case of doubt you can also install a virtual midi cable (like LoopBe1) and try with another software sequencer or the tonelike tools that comes with electribulator.
You can also set the output to the general midi device instead of electribe to avoid some other potential problems.
I hope it helps, tell me...
A new interpolation system for envelop has been added recently.
Now you have the choice between linear interpolation (like before) and spline interpolation. That's should open new possiblities. Computation of the spline is costless so the soft will not be slowed by that. (all computation are made only when changing knot of the curve, and it's more than fast).
Lineaire :
Spline :
Une release suivra... un jour...
Now you have the choice between linear interpolation (like before) and spline interpolation. That's should open new possiblities. Computation of the spline is costless so the soft will not be slowed by that. (all computation are made only when changing knot of the curve, and it's more than fast).
Lineaire :
Spline :
Une release suivra... un jour...
As I forget to put the latest version (2 years) ago, I correct the error :
http://renaud.warnotte.be/Projects/Elec ... _0_2_4.zip
http://renaud.warnotte.be/Projects/Elec ... _0_2_4.zip
Here's a new beta version. It includes nothing new. Just refactoring the code in order to use maven building system.
I cannot test it, so i'd appreciate feedback.
http://renaud.warnotte.be/Projects/Elec ... _0_3_0.zip
Then maybe i'll also free the source code...
I cannot test it, so i'd appreciate feedback.
http://renaud.warnotte.be/Projects/Elec ... _0_3_0.zip
Then maybe i'll also free the source code...
Worth what it worth...
It worth what it worth ... but released latest (and non verified) source code of it .
https://github.com/warnotte/Electribulator
https://github.com/warnotte/Electribulator