Krome pedal.
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Krome pedal.
Can I use 3 off the same pedal for the Krome 3 pedal input or each one are different pedal for each pedal ports?
-
blueviolin
- Posts: 9
- Joined: Mon Aug 11, 2014 11:30 pm
- Location: Germany
Obviously no expert wants to answer so I will try.
Krome has inputs for three different types of pedals:
- Pedal, typically to control the volume. Electrically it is a variable resistor or more accurate a potentiometer.
- Switch, an on/off switch which works similar to the SW1 and SW2. Since I do not have one I do not know the details.
- Damper, mainly an on/off switch which holds the tone even if the key has been released. But Krome also supports half damping. Some damping pedals have a position between damping and no dampiong. So internally they are also more a variable resistor than a switch. May be you can use a simple switch, of couse without half damping function. I never tried this so I am not sure.
I hope my answer is of some help.
Chers
blueviolin
Krome has inputs for three different types of pedals:
- Pedal, typically to control the volume. Electrically it is a variable resistor or more accurate a potentiometer.
- Switch, an on/off switch which works similar to the SW1 and SW2. Since I do not have one I do not know the details.
- Damper, mainly an on/off switch which holds the tone even if the key has been released. But Krome also supports half damping. Some damping pedals have a position between damping and no dampiong. So internally they are also more a variable resistor than a switch. May be you can use a simple switch, of couse without half damping function. I never tried this so I am not sure.
I hope my answer is of some help.
Chers
blueviolin
Korg Krome, Roland G-70, Roland RD600, Kawai SX240