Low Sound (SEQUENCER TO WAV)

Pouyakhoshgoo · Post by **Pouyakhoshgoo** » Fri Dec 26, 2014 8:50 am

Dear SanderXpander!
How do we use this limiter that you mentioned?!
Can it be done in the K. Itself?!
Would you please teach us how to use it?

Cheers

SanderXpander · Post by **SanderXpander** » Fri Dec 26, 2014 9:01 am

I haven't really done a lot of sequencing, let alone resampling a sequence on the Kronos. But I'm assuming the sampling happens post-fx? Then you could put a mastering limiter as one of the two total fx.

That said, if you need to use a lot of gain boost, it sounds as if your track levels are simply low.

Pouyakhoshgoo · Post by **Pouyakhoshgoo** » Fri Dec 26, 2014 9:04 am

I see...

I'll do what you said and see what happens!
Youre great man! You've always been a big help here!
How do you know these things?????
Lol...!!!!

Thanks a lot!

SanderXpander · Post by **SanderXpander** » Fri Dec 26, 2014 9:35 am

Hanging around on the forums, reading a lot of discussions, and using my Kronos

Half of it is stuff I learned on here from other users!

In this case, I hope it helps but I can't be sure. I do all my recording on the computer. But you can run into similar problems there so perhaps the solution will be similar as well.

By the way, if you have to normalize, especially by a significant amount, make sure you're working on a 24-bit file, not a 16-bit one.

Pouyakhoshgoo · Post by **Pouyakhoshgoo** » Fri Dec 26, 2014 11:25 am

I'll keep that in mind too!
Thanks alot!
How do i normalize on Kronos?
( sorry for my dumb questions)
Never had a synthesizer before!

Cheers

psionic311 · Post by **psionic311** » Fri Dec 26, 2014 12:24 pm

The mastering limiter Sander suggested is an internal FX within the Kronos. You could also experiment with the compressors if it suits your music.

From Combi/SEQ mode:

Select MFX/TFX tab, then select Routing. The TFX1 or TFX2 will apply the effect you choose to your entire mix. Press ON, then press No Effect, and then you will have the choice of all the Dynamic filters. Let's try Stereo Mastering Limiter. Press OK.

At first the effect may be only a slight boost. This is only one default setting; there are more presets to try. Press the TFX1 tab, and you should see the page to edit the parameters for Stereo Mastering Limiter. For now, in the upper right corner, press the "P" and then you will see different preset choices. Try P04 "Mix MaxMax!!".

Now you can experiment with other FX and their presets to get an idea of what they do.

smaugxxx · Post by **smaugxxx** » Fri Dec 26, 2014 12:25 pm

We can use a limiter on the Kronos or buy it?
I record directly the kronos on the computer via the card sound and its the same !

I Dont understand, ok i will make that psionic311

Pouyakhoshgoo · Post by **Pouyakhoshgoo** » Fri Dec 26, 2014 12:32 pm

Thanks psionic!

Really appreciate it!!!

SanderXpander · Post by **SanderXpander** » Fri Dec 26, 2014 2:10 pm

I don't know exactly what you mean smaugxxx, but yes, this mastering limiter is an effect available on the Kronos.

smaugxxx · Post by **smaugxxx** » Sat Dec 27, 2014 2:58 pm

psionic311 YOU GIVE THE SOLUTION !!!!!! Merci

psionic311 · Post by **psionic311** » Sat Dec 27, 2014 11:51 pm

De rien, but thanks also go to Sander. I'm glad it worked for you

hammondcuni · Post by **hammondcuni** » Mon Dec 29, 2014 3:33 pm

Show a picture of your IFX routing.

hammondcuni · Post by **hammondcuni** » Mon Dec 29, 2014 6:08 pm

Show a picture of your IFX routing.