Press the MEDIA button, then choose the "Save" tab (bottom left), then choose the Drop-down menu (top right), and choose "SAVE ALL (PCG & SEQ).,unless you only want to save one or the other of them.
I hope this helps.
free Best of Triton programs for Krome
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Kurniadion
- Posts: 7
- Joined: Mon Apr 16, 2012 7:56 pm
Installing BEST OF TRITON to KORG M3
Just wondering what will happen if I install this programs into my KORG M3. Will it work at all? If so, it will be awesome 
KORG M3-88 XPANDED
-
Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
Re: Installing BEST OF TRITON to KORG M3
I don't think it will work. Here is a discussion on compatibility.Kurniadion wrote:Just wondering what will happen if I install this programs into my KORG M3. Will it work at all? If so, it will be awesome
http://www.korgforums.com/forum/phpBB2/ ... c3217184af
Best of Triton sounds and F bank
Before loading the Triton set, you can back up your F bank to a media card for safe keeping. I believe you should do this frequently anyway to avoid accidentally losing your patch edits, but it's not required to load a few Triton sounds if your F bank is not completely full. You can put the Triton sounds on a media card and sample them from the card individually on the Krome without writing them to the F bank. When you find a few you like, load and save them individually to blank spaces in your F bank. There were no instructions for doing this, but it's worth a little navigating in the media menu if you don't want the entire set loaded.
Me too! It's actually mentioned in the manual, but i found it by accident. It can act like an extra bank (or banks) without loading into the Krome, if you just need presets. Just tap on the screen when in 'media' and it sounds the patch. Even some of the 'combis' work, including 'user' knob settings.jggiano wrote:Opening the Triton PCG file until accessing the individual patches and then saving them in the F bank works GREAT! I wasn't aware that getting to that "layer" could be done. Thanks so much for sharing.
Jim G
-
michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
You also can use PCG Tools for the Korg Krome to exchange programs/combis.
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
-
drewtheshmoo
- Posts: 11
- Joined: Wed Oct 02, 2013 10:47 am
- Location: UK
THANK YOU VERY MUCH FOR THIS INFORMATION, KROMEITALY!KromeItaly wrote:Very beautiful this news.!
https://www.youtube.com/watch?v=dOv8itRgk50
http://www.korg.com/krome // Support & Downloads // Soundware // PC/MAC:Soundware:USA_Krome_Best_of_TRITON.zip
TUTORIAL FILE PDF
Loading TRITON.PCG onto your Krome:
1. After downloading the .zip file from our website, it will need to be unzipped.
2. After unzipping the download, you will see a file in the newly created folder named TRITON.PCG. Copy the TRITON.PCG file onto your SD (max. 2 GB) or SDHC card (max. 32 GB).
Note: SDXC cards are not supported.
3. Put the card into your Krome, and press the MEDIA button.
4. If you are not already on the “Load” tab, touch “Load” on the bottom of the screen.
5. Touch “TRITON.PCG” to highlight it, and then touch the “Load” button.
6. Verify that “Load TRITON.SNG too?” is not selected, and then touch “OK”.
7. The screen will briefly display, “Now writing into internal memory.” When this message disappears, loading has completed.
To access these sounds, press the PROG button, then press the BANK F button. The first sound you will see is “A000 Super Grand”. Note that these sounds will be retained even if you turn off your Krome’s power, so you do not need to repeat this process every time you turn on your Krome.
NEW 128 SOUND PERFORMANCE BANK F
Greats Korg
GRACIE!