Some programs KRS-07 refer to a nonexistent Wave Sequence
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Senior Member
- Posts: 314
- Joined: Fri May 30, 2014 6:57 am
Some programs KRS-07 refer to a nonexistent Wave Sequence
Today I installed and authorized KRS-07 and noted that the program U-BB66 - U-BB68 link to empty banks Wave Sequences: I-141 - I-144. Maybe it's me breaking the bank Wave Sequences (I have installed Int 000 - 139, Int 140-149 - Init Wave Sequence). Looked in the archive PRELOAD_V2.PCG - there as well!
Somebody set KRS-07? Check how you do.
Somebody set KRS-07? Check how you do.
- danatkorg
- Product Manager, Korg R&D
- Posts: 4205
- Joined: Fri Jan 21, 2005 7:28 am
- Location: California, USA
- Contact:
I've verified that these sounds rely on a few Wave Sequences which are in the KRONOSX preload, but not in the original KRONOS preload. The responsible people are now investigating how to address this problem, and I expect that they'll have a solution. In the meantime, I'm sorry for the inconvenience.
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
-
- Approved Merchant
- Posts: 1069
- Joined: Mon Mar 19, 2007 4:38 am
Dan is it possible we can get a guide to loading wavesequences and how they are structured/organized in relation to programs?
I notice the more libraries I have that use them, the more conflicts that arise with sounds pointing to the wrong place.
Like for example: Should all sounds using wavesequences in the same library be grouped together in the same bank? Stuff like that.
I notice the more libraries I have that use them, the more conflicts that arise with sounds pointing to the wrong place.
Like for example: Should all sounds using wavesequences in the same library be grouped together in the same bank? Stuff like that.
Korg: KRONOS 73, M50-61, 01W/r
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
Dandanatkorg wrote:I've verified that these sounds rely on a few Wave Sequences which are in the KRONOSX preload, but not in the original KRONOS preload. The responsible people are now investigating how to address this problem, and I expect that they'll have a solution. In the meantime, I'm sorry for the inconvenience.
Will korg let us know when this has been sorted ie emails us

Ohmnisphere
Kronos 73
Kronos 73
If the Kronos X and Kronos 2 have more wave sequences, is there a way to bring the Kronos Classic to be the same through an update?
-Mc
-Mc
Current Korg Gear: KRONOS 88 (4GB), M50-73 (PS mod), RADIAS-73, Electribe MX, Triton Pro (MOSS, SCSI, CF, 64MB RAM), SQ-64, DVP-1, MEX-8000, MR-1, KAOSSilator, nanoKey, nanoKontrol, 3x nanoPad 2, 3x DS1H, 7x PS1, FC7 (yes Korg, NOT Yamaha).
- danatkorg
- Product Manager, Korg R&D
- Posts: 4205
- Joined: Fri Jan 21, 2005 7:28 am
- Location: California, USA
- Contact:
Yes, I believe so.lotty1 wrote:Dandanatkorg wrote:I've verified that these sounds rely on a few Wave Sequences which are in the KRONOSX preload, but not in the original KRONOS preload. The responsible people are now investigating how to address this problem, and I expect that they'll have a solution. In the meantime, I'm sorry for the inconvenience.
Will korg let us know when this has been sorted ie emails us
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
-
- Platinum Member
- Posts: 9451
- Joined: Wed May 15, 2002 12:46 am
- Location: Discovery Bay (San Francisco Bay Area)
don't forget the " Sound Pack with the KRS07 " needs to be purchased/installed for the 2011 Kronos ( classic ? ) and the " X" to be the 'same ' as the 2015 Kronos 2.McHale wrote:If the Kronos X and Kronos 2 have more wave sequences, is there a way to bring the Kronos Classic to be the same through an update?
-Mc
-
- Platinum Member
- Posts: 9451
- Joined: Wed May 15, 2002 12:46 am
- Location: Discovery Bay (San Francisco Bay Area)
was referring to ' sound ' not physical appearance or something physical inside such as a larger SSD or more ram.oldguy29 wrote:i have purchased and installed the Exs17,18 Krs07 sound pack from Korg on my Kronos X. It makes it more like the Kronos 2 but I do not believe that it makes it identical to the new Kronos 2.
and the only tangible sound diff I am aware of is that the EXs19 is theoretically a free d/l for Kronos 2 owners.
-
- Approved Merchant
- Posts: 1069
- Joined: Mon Mar 19, 2007 4:38 am
Yeah I don't get it either. The only thing I can come with is someone didn't think that point through or it was never brought up in a meeting.rs.felicio wrote:This weekend I confirmed. There is a difference in "INT wavesequence bank" between PRELOAD.PCG from New Kronos versus Kronos 1 and X.
So, looks like a simple problem to solve .... only a small mistake when generate the KSR07 (from New Kronos preload) for old Kronos .... Just was not providing the wavesequences INT bank.
https://www.dropbox.com/s/j0i689uppyrdi ... s.bmp?dl=0
Another attention point that I've discussed with an New Kronos owner and a user for my own packages, is that New Kronos Users should to remap all Users Combis
Unfortunately users of new Kronos will have considerable work to use Combis generated in Kronos 1 and X .... a large number of KSRs from Korg and others partner and several packages available in korgpatches.com or here on KF need to be "re-created"..... and this will further complicate the sharing process among users.
I can't understand the reasons for this change (I-A to U-AA, etc) and not is the focus to this discussion here .... but in fact it will hamper the lives of new users....
Today I think the "Easy" way is use the cut/paste on PCG Tools to recreate the combis.
I really wish we had more management tools for wavesequences and trimming KSCs. A simple "What programs use this waveform?" Would be a great help.
Currently I noticed that EXs16 and EXs19 use the same wavesequencing bank. Problem is I have certain patches scattered all over. Still figuring what's my best course of action. Undoubtedly will involve PCG tools!
Korg: KRONOS 73, M50-61, 01W/r
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
- rs.felicio
- Approved Merchant
- Posts: 307
- Joined: Fri Dec 30, 2011 5:20 pm
- Location: São Paulo - Brasil
Wave Sequences for KSR-07?
How do we load thte Wave Sequences for the new Sound Pack? Does anyone know yet?
Wave Sequences for KSR-07?
How do we load thte Wave Sequences for the new Sound Pack? Does anyone know yet?
-
- Senior Member
- Posts: 314
- Joined: Fri May 30, 2014 6:57 am
Re: Wave Sequences for KSR-07?
I made for myself empty PCG includes all Wave Sequences and the desired settings. From this file PCG further by using PCG Tools you can easily obtain the desired PCG, which includes all the necessary programs.lluvaas wrote:How do we load thte Wave Sequences for the new Sound Pack? Does anyone know yet?