Hi guys,
My KP3 has been quietly sitting on the shelf (to my knowledge at least) and when i pull her out to use the touch pad is simply not responding a all.
Everything else seems to be working (fx, sampling etc) but the touch pad is giving no response whatsoever....
Last time i was using her i was messing around with MIDI sync settings (and maybe inadvertedley some others) but there's no other think i could think of that could be doing this.
Has taken no knocks of falls to my knowledge...
Let me know if you know anything that might help!
Cheers,
Ed
KP3 Touch pad NOT RESPONDING
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Spheric El
- Platinum Member
- Posts: 795
- Joined: Mon Jul 21, 2014 7:32 pm
- Location: Liverpool
I'm not an expert here,you may find better help looking through older threads on this forum(or previous pages),unless someone more knowledgable can come in with more info.
You can calibrate the KP3 with holding down 7&8 and sampling buttons while powering on.This sends you into a process...check..
www.korg.co.jp/product/dance/kp3/kp3/_calib_j1.pdf
For info on this.This may not be of any use.You might want to open machine up(first) and check the ribbon hasn't come loose-a likely cause of said problem,but yes,check previous comments on non working touchpads.
Good luck.
You can calibrate the KP3 with holding down 7&8 and sampling buttons while powering on.This sends you into a process...check..
www.korg.co.jp/product/dance/kp3/kp3/_calib_j1.pdf
For info on this.This may not be of any use.You might want to open machine up(first) and check the ribbon hasn't come loose-a likely cause of said problem,but yes,check previous comments on non working touchpads.
Good luck.