E2 Firmware Update Suggestions?

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
Padevil
Posts: 6
Joined: Sat Aug 29, 2015 5:26 pm
Location: Helsinki, Fi
Contact:

E2 Firmware Update Suggestions?

Post by Padevil »

Some suggestions on Electribe 2 (Music Production Station) Firmware Update.

- I think would be EXTREMELY useful if we could sync the LFO's on the modulation section to the tempo. It would be possible to make more precise evolving patterns, and bend a bit the limit of only 4 mesures per pattern. For example the longest sync parameter, controlled by speed knob, being 128 mesures and the smallest being 1/128. To alternate between sync LFO and free running LFO, an extra option on Menu could be placed.

-It would be perfect also to export the recorded events as Audio.

-There is also room for improvement on triggers response and overall sound quality.

What are your suggestions?
<iframe width="100%" height="166" scrolling="no" frameborder="no" src="https://w.soundcloud.com/player/?url=ht ... "></iframe>
Tarekith
Platinum Member
Posts: 765
Joined: Thu May 15, 2008 4:34 am
Location: Luxembourg
Contact:

Post by Tarekith »

Your first one is already there. Any of the modulation sources that have a "B" in the name are synced to tempo, the only downside being that they also reset on key on.
SMK
Platinum Member
Posts: 1197
Joined: Sun Nov 26, 2006 10:22 pm
Contact:

Re: E2 Firmware Update Suggestions?

Post by SMK »

Padevil wrote: -It would be perfect also to export the recorded events as Audio.
I have not tried event recorder out yet but I thought this was what the Audio export in the new 1.10 update was all about. So there option for the event recorder to actually record and export the audio? Would seem like an obvious move to me.
Korg PX5d
Korg Quad
Korg KP3
Korg DS-10
Korg PadKontrol
Korg K25
Korg Monotron
Korg Electribe 2
Korg Electribe Sampler 2
Roland GK-3A
Roland GI-20
Fishman Triple Play
BC Rich Guitar

My Music
roblabs
Platinum Member
Posts: 1396
Joined: Sun Sep 25, 2011 12:56 am
Location: NYC

Re: E2 Firmware Update Suggestions?

Post by roblabs »

SMK wrote:
Padevil wrote: -It would be perfect also to export the recorded events as Audio.
I have not tried event recorder out yet but I thought this was what the Audio export in the new 1.10 update was all about. So there option for the event recorder to actually record and export the audio? Would seem like an obvious move to me.
The Audio Export function in 1.10 exports audio as .wav files for each part in a pattern. Its basically the equivalent of the Ableton export. [/img]
jbvdb493
Full Member
Posts: 164
Joined: Sun May 24, 2015 12:15 am

Post by jbvdb493 »

Copy paste bars inside patterns like in gadget
Pygmy
Junior Member
Posts: 54
Joined: Sun Aug 30, 2015 7:01 pm

Post by Pygmy »

There's already a main topic on this, it would be best to keep it in there so we have all the requests / ideas centralized : http://www.korgforums.com/forum/phpBB2/ ... hp?t=98672
Padevil
Posts: 6
Joined: Sat Aug 29, 2015 5:26 pm
Location: Helsinki, Fi
Contact:

Post by Padevil »

Pygmy wrote:There's already a main topic on this, it would be best to keep it in there so we have all the requests / ideas centralized : http://www.korgforums.com/forum/phpBB2/ ... hp?t=98672
Thanks, haven't seen that
<iframe width="100%" height="166" scrolling="no" frameborder="no" src="https://w.soundcloud.com/player/?url=ht ... "></iframe>
Post Reply

Return to “Korg Electribe”