Selecting Correct RAM for Korg Kronos Upgrade
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Platinum Member
- Posts: 837
- Joined: Sat Jan 12, 2008 4:13 pm
- Location: Herefordshire, UK
- Contact:
Just wanted to mention that I opened up my recently bought Kronos X to have a look inside -- and noticed that the motherboard looks different from all the inside pictures I have seen here so far. Especially the RAM »sticks«. They have the form factor usually found in laptops and are mounted lying flat on the motherboard, one atop the other. Forgot to take a picture, though...
- geoelectro
- Platinum Member
- Posts: 1040
- Joined: Fri Sep 14, 2012 2:12 am
- Location: Texas
- Contact:
- Francois
- Approved Merchant
- Posts: 4855
- Joined: Tue May 06, 2003 12:38 am
- Location: Northants - UK
- Contact:
Yes, there are a few differences:
The RAM sticks will look different indeed. But the Kronos X is already maxed out so you shouldn't have to buy RAM for the X, unless it's to change a defective module.
Code: Select all
Kronos Kronos X
RAM = 2 Go (DIMM x 1) 3 Go (SO-DIMM x 2)
SSD = 30 Go 62 Go
Carte-mère = Intel D510MO Intel D525MWV
Processeur = Intel Atom 1.66 Ghz Intel Atom 1.8 Ghz
-
- Full Member
- Posts: 182
- Joined: Sat Dec 17, 2011 5:08 am
- Location: Live Music Capital of the World
I don't see many reports of specific types of RAM failing to work. Besides, it has been stated that as long as you have the correct specs, it should be ok.
FWIW, I purchased a pair of Corsair XMS2 DDR2 Memory (CM2X2048-6400C5) a year ago for my orginal Kronos 73. I replaced the original 2G Hynix with the Corsair pair. All seemed great while I played a few gigs with no issues. However, I began noticing it would shut down after being be left on for a while (over night). Then occasionally, it would randomly shut down at gigs. Not good. I checked proper power, and ensured memory and other components had not become dislodged. Finally, I purchase another 2G Hynix to match the original, and replaced the Corsair. After three months, I am glad to report I have had several shows and long studio sessions with no random shut downs. (Crossing fingers.)
FWIW, I purchased a pair of Corsair XMS2 DDR2 Memory (CM2X2048-6400C5) a year ago for my orginal Kronos 73. I replaced the original 2G Hynix with the Corsair pair. All seemed great while I played a few gigs with no issues. However, I began noticing it would shut down after being be left on for a while (over night). Then occasionally, it would randomly shut down at gigs. Not good. I checked proper power, and ensured memory and other components had not become dislodged. Finally, I purchase another 2G Hynix to match the original, and replaced the Corsair. After three months, I am glad to report I have had several shows and long studio sessions with no random shut downs. (Crossing fingers.)
Why the OS can only see circa 3G
Not sure this has been clearly answered so here goes:
The Kronos has a cut down 32-bit version of Linux. It is because it is a 32 Bit version that it can only memory reference <4G of RAM.
If Korg ever releases a 64-bit version, which personally I can never imagine they would until Krono 3 or whatever the next generation is, only then could the system see and reference 4GB of RAM or more.
I deliver/install computer (Servers) systems with over 16TBytes of RAM so once they release a 64 but version the sky is the limit.
The Kronos has a cut down 32-bit version of Linux. It is because it is a 32 Bit version that it can only memory reference <4G of RAM.
If Korg ever releases a 64-bit version, which personally I can never imagine they would until Krono 3 or whatever the next generation is, only then could the system see and reference 4GB of RAM or more.
I deliver/install computer (Servers) systems with over 16TBytes of RAM so once they release a 64 but version the sky is the limit.
Korg Krono 2011