TOUCH SCREEN ISSUE HELP!

eltmatt · Post by **eltmatt** » Mon Mar 21, 2016 12:33 pm

I've just got a second hand Krome off ebay and everythings working fine except the top right of the screen where the drop down menu is, isn't coming up when I press on the screen.

Is there a way to fix this? Or another way to access that menu?

voip · Post by **voip** » Mon Mar 21, 2016 1:57 pm

Sounds like the screen needs recalibrating. Touch Panel Calibration can be found in the Global menus. Once done, it should be possible to access the drop-down. Callibration is on page 217 of the Krome Parameter Guide. There is also a hint to get to getting to the relevant menu from the Global P0 menu, i.e. holding down the ENTER key and pressing the 3 button.

.

eltmatt · Post by **eltmatt** » Tue Mar 22, 2016 5:37 pm

Great, this fixed it. thanks

gnbutt · Post by **gnbutt** » Wed Mar 23, 2016 9:46 pm

I have that exact problem with my M3, top right pull down menu is almost impossible to activate. Will give your recommendation on the Krome a try and see if this works for the M3 too. Thanks !

Topaz-uk · Post by **Topaz-uk** » Fri Nov 11, 2016 12:11 pm

thanks very much for this

(books day off to RTM)

voip wrote:Sounds like the screen needs recalibrating. Touch Panel Calibration can be found in the Global menus. Once done, it should be possible to access the drop-down. Callibration is on page 217 of the Krome Parameter Guide. There is also a hint to get to getting to the relevant menu from the Global P0 menu, i.e. holding down the ENTER key and pressing the 3 button.

.