Vote for your five (5) most wanted fixes for the E2 and ES2

Rashk · Post by **Rashk** » Mon Jun 13, 2016 9:35 pm

27, 30, 49, 52, 77

Kurgast · Post by **Kurgast** » Tue Jun 14, 2016 8:54 am

2, 4, 8, 79, 82

Greetings

_tsm_ · Post by **_tsm_** » Wed Jun 15, 2016 2:09 pm

27. streaming samples directly from the SD card (potentially increase sample memory)
41. Revise display screen to display more information (knob values, FX info, etc) - minimum waveform representation on the screen - for quick editing (E2S)
52. Decay and release could be separated (for release press shift)
74. pre listening before loading samples
79. per part play speed - allow a single part to be played at half speed / quarter speed or other option

Z7A · Post by **Z7A** » Wed Jun 15, 2016 5:25 pm

My two suggestions was somehow not added to the final list. I didn't know I had to put numbers before them, but I actually wrote it in the correct thread some time before the fixes 83 and 84.

Posted: Wed Jun 08, 2016 3:49 pm

Z7A wrote:For the electribe2 to be able to load a file named e2Analog.all containing Analog OSCs created by a VA software editor.

Add all the filters to the electribe sampler.

My votes:
85
86
27
41
9 (12 is the same?)

pgnnwy · Post by **pgnnwy** » Thu Jun 16, 2016 5:35 pm

Number one for me isn't on the list.... which is carrying over mutes between patterns. It's hard to include musical progression during a jam without this.

After that it's...

74. pre listening before loading samples
73. add the ability to nudge notes
32. replace the main filter and resonance with the IFX versions
9. per part MFX send level
45. direct access to editing various modifications/parameters of each step

jpeg · Post by **jpeg** » Fri Jun 17, 2016 9:49 am

the main thing for me is:

27. streaming samples directly from the SD card (potentially increase sample memory)

2nd choice is

6. filter improvements (tracking, better high resolution, etc)

Loudest · Post by **Loudest** » Fri Jun 17, 2016 10:00 am

jpeg wrote:27. streaming samples directly from the SD card (potentially increase sample memory)

is it really possible to play several samples directly from an SD card and play them simultaneously ??
and if so, there are hardware samplers that do that? (I'm interested)

I imagine that it is possible to read one sample at a time with this method (which can be useful for long samples)

but inside a full worklow (like the one of the Electribe) read samples directly from a SD card (so without loading them into RAM...) it seems crazy, right?

Sebberdii · Post by **Sebberdii** » Fri Jun 17, 2016 10:48 am

@loudest sp404sx does read directly from SD card. It Can load up to 48 h stereo sample time and 96 h in mono.

Loudest · Post by **Loudest** » Fri Jun 17, 2016 11:16 am

Sebberdii wrote:@loudest sp404sx does read directly from SD card. It Can load up to 48 h stereo sample time and 96 h in mono.

thank you very much!

but it can read the samples simultaneously?

up how many samples simultaneously?

because if it is technically possible so I want this in my electribe2s!

can I change my vote?

Loudest · Post by **Loudest** » Fri Jun 17, 2016 11:22 am

3. Add the ability to copy chords and notes in step edit
&
60. Add the ability to copy/paste bars/notes around the whole machine

are pretty much the same thing, right?

I voted "3." but some voted "60." I think those votes should be added...

jpeg · Post by **jpeg** » Fri Jun 17, 2016 12:56 pm

Loudest wrote:
Sebberdii wrote:@loudest sp404sx does read directly from SD card. It Can load up to 48 h stereo sample time and 96 h in mono.
thank you very much!

but it can read the samples simultaneously?

up how many samples simultaneously?

because if it is technically possible so I want this in my electribe2s!

can I change my vote?

why would you question if its technically possible? this is normal run of the mill; sp505 could do this with at least 8 samples or more back in 2002, so korg are really slipping.

h.vel · Post by **h.vel** » Fri Jun 17, 2016 1:17 pm

Loudest wrote:3. Add the ability to copy chords and notes in step edit
&
60. Add the ability to copy/paste bars/notes around the whole machine

are pretty much the same thing, right?

I voted "3." but some voted "60." I think those votes should be added...

No, I wouldn't say it is the same.

3. = copy notes/chords in step mode
60. = i.e. copy bar 1 to bar 3 into the same pattern. This function allows you to copy the whole datas (steps, automation, etc.) to other bars...

Loudest · Post by **Loudest** » Fri Jun 17, 2016 1:42 pm

@h.vel

yeah but the 60. has a better wording
because copy/paste works everywhere (so in step edit too)

and for steps...bars...etc

I voted 3. but I realize that I prefer the wording of the 60.

h.vel · Post by **h.vel** » Fri Jun 17, 2016 1:51 pm

Ah, now I know what you mean.. then: 60. +1 vote (and 3. -1 vote)

h.vel · Post by **h.vel** » Fri Jun 17, 2016 1:58 pm

Though we still don't know if bugs need to be voted, here are my requests:

0. first fix all bugs! (the red colored issues)

45.
49.
52.
79.
80.