Electribe 2 petition

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

David Tribe
Posts: 17
Joined: Mon Aug 29, 2016 4:39 pm

Chain not what I expected...

Post by David Tribe »

What's going on..? Dead stupid easy Song Mode.. 33 of the petition.

Double tap of PATTERN SET to blink, enabling a real chain mode or better yet a link/song mode. Any Pad 1-16 selected to play in sequence. i.e. Pad 2+Pad10, Pad1+Pad16, etc.. And even unelection, HOLDING pattern set and pressing any pad to deselect it from the link/song chain.
David Tribe
Posts: 17
Joined: Mon Aug 29, 2016 4:39 pm

Here's another one..

Post by David Tribe »

Let's up this thing to a 1000 Patterns, it really should be unlimited but I think a 1000 will due.. Eh?
Init Pattern Banks
Pattern Banks A-D equaling 1000 Patterns Total, 250 per bank.
Init Banks selected with the "<" (back arrow) Held and the value knob turned to change the value to A001, B001, C001, D001
No, yes, maybe so..?
David Tribe
Posts: 17
Joined: Mon Aug 29, 2016 4:39 pm

Every Production unit should have a Mixer, No? I say YES!

Post by David Tribe »

Mixer Mode
What do you think about Part Mute Held to initiate the Mixer.
So the Arrows Back and Forward would select a Track and the Value Knob would select a Pattern.
Knobs from (Pitch/Glide to the edit knob) (7 knobs total) become Tracks 1-7 Level adjustment and Pads 1-7 for mute. That's like 7 electribe 2s in ONE! I'm ready to buy the blue guy now! This thing really does have a lot of potential!
David Tribe
Posts: 17
Joined: Mon Aug 29, 2016 4:39 pm

Tempo Guys, damn.. Really?

Post by David Tribe »

Here's another little idea :lol:

How about we get Beat Matching in there..?
Let's HOLD TAP to maintain Tempo in a Pattern Change, Tracks, and Pattern Song/Links..
User avatar
Cade
Full Member
Posts: 127
Joined: Fri May 20, 2016 9:07 pm

Post by Cade »

These are all good ideas, but I am not sure I can put them on this version of the Petition.
I intend on printing the Petition on high quality paper with a laser printer and sending it to the Korg executives this week, and don't feel we can add this stuff at this time. (we have 787 supporters so far)

Perhaps we should compile a list of recommended fixes and improvements that we can forward to Korg (assuming they will listen), or add to the next rendition of the Petition in the future. 8)
My Gear:
Korg Electribe 2 Sampler, Keith McMillen Instruments K-Mix, Korg Volca Bass, Cyclone Analogic TT-303, Novation Ultranova, Roland System-1, Roland JP-08 Boutique, Roland SH-201, Focusrite Saffire PRO 14, Korg Gadget v3 on iPad Air, Reason 10 on ZenBook Pro
Loudest
Full Member
Posts: 174
Joined: Tue Aug 11, 2015 2:30 pm

Post by Loudest »

Hi Cade!

did you send the petition finally?

we surpass the votes of the DSI Tempest petition!! 8)
(Symbolically it's important ... since this petition was successful, with positive feedback from DSI)

Cheers!
:wink:
User avatar
Cade
Full Member
Posts: 127
Joined: Fri May 20, 2016 9:07 pm

Post by Cade »

Sent the petitions this weekend, and they should be going out in Monday's post.
Image
(Note: pic was taken just before postage was put on by the Mail Center)
The Mail Center I used said it may take a week to 10 days to receive these in the UK or Japan.
I will send the petition via email (to support@korgusa.com and info@korg.co.uk) on next Monday.
My Gear:
Korg Electribe 2 Sampler, Keith McMillen Instruments K-Mix, Korg Volca Bass, Cyclone Analogic TT-303, Novation Ultranova, Roland System-1, Roland JP-08 Boutique, Roland SH-201, Focusrite Saffire PRO 14, Korg Gadget v3 on iPad Air, Reason 10 on ZenBook Pro
h.vel
Full Member
Posts: 104
Joined: Thu Jul 30, 2015 9:58 am

Post by h.vel »

Great! :D
Steeplemouth
Full Member
Posts: 152
Joined: Tue Sep 29, 2015 2:46 am

Post by Steeplemouth »

Great work Cade, well done sir!
Loudest
Full Member
Posts: 174
Joined: Tue Aug 11, 2015 2:30 pm

Post by Loudest »

Image




(... and thank you very much Cade!

Great work 8) )
mihata
Junior Member
Posts: 89
Joined: Fri Jun 12, 2015 6:45 am
Location: Rotterdam

Post by mihata »

Thank you Cade and everyone else who participated!
Good luck!
Electribe 2 - Novation Circuit - Critter & Guitari Pocket Piano Midi - Monotron Delay - MicroGranny - PO-12 - KP2S - HOF
thebiglebowski
Full Member
Posts: 123
Joined: Thu Jan 22, 2015 12:39 am

Post by thebiglebowski »

Thanks Cade and all the contributors and voters. Good job!
Electribe2 / Volca Beats / Volca FM / Monologue
DemonLlama
Posts: 17
Joined: Sat Jan 31, 2015 9:50 pm
Location: Germany

Post by DemonLlama »

(They will use the mail addresses and add us to their mailing list. We will get hilarious newsletters about "daily pushing updates". ](*,) )

Thanks Cade for your effort. This petition is the only reason why I have my E2 not yet sold.
bloomes
Posts: 38
Joined: Thu Mar 10, 2016 10:55 pm

Post by bloomes »

after waiting 6 weeks (since cade has sent the petition/letters to korg) it seems that korg is ignoring everything, right? not one single answer from them?

wow, that is a bit arrogant.
User avatar
Cade
Full Member
Posts: 127
Joined: Fri May 20, 2016 9:07 pm

Post by Cade »

bloomes wrote:after waiting 6 weeks (since cade has sent the petition/letters to korg) it seems that korg is ignoring everything, right? not one single answer from them?

wow, that is a bit arrogant.
Correct. :?
I have not received any email or postal mail from Korg about the petition or changes.

The last activity was 2016.07.21 when they released the red and blue versions and the firmware version 2.02. Image

Let's hope they release another update for the units in march of next year: :o

2015.05.23 - Version 1.06 (+5 months)
2015.10.30 - Version 1.14 (+1 month)
2015.11.18 - Version 1.15 (+8 months)
2016.07.21 - Version 2.02 (with new patterns)
+ 8 months will be March 2017
My Gear:
Korg Electribe 2 Sampler, Keith McMillen Instruments K-Mix, Korg Volca Bass, Cyclone Analogic TT-303, Novation Ultranova, Roland System-1, Roland JP-08 Boutique, Roland SH-201, Focusrite Saffire PRO 14, Korg Gadget v3 on iPad Air, Reason 10 on ZenBook Pro
Post Reply

Return to “Korg Electribe”