Problem
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Problem
I turned on my key board and a message displayed that my files were corrupted but have been repaired. Thought to be safe I would return it to the factory preset. Now the problem is, I have no led lights when I press the Karma control bank on the left hand side. Strangely, the lights above the 8 sliders have gone odd. The first 4 are OK the next are dim. Please ideas.
-
Bald Eagle
- Platinum Member
- Posts: 2278
- Joined: Sun Jan 25, 2009 12:06 am
- Location: Long Island, NY
By factory reset if you mean reloading the default PCG, that doesn't do anything that would affect the hardware in that way. That just reloads programs, combis and global settings.
When you power on the only files being accessed should be the OS files. And if they are corrupt anything is possible. Just because it says it's repaired I wouldn't necessarily believe it.
You may want to try reinstalling the OS to see if that helps. If not that doesn't help I would begin to suspect a hardware problem that requires service.
When you power on the only files being accessed should be the OS files. And if they are corrupt anything is possible. Just because it says it's repaired I wouldn't necessarily believe it.
You may want to try reinstalling the OS to see if that helps. If not that doesn't help I would begin to suspect a hardware problem that requires service.