Hi all,
I've owned my Kronos 2 73 for a few months now, and I need a little guidance to fix (or work around) an issue I'm encountering.
My live rig is my Kronos and a Hammond XK clonewheel. When I select a slot in my set list, it transmits a program change to the XK (which is what I want). In addition, however, it also seems to be transmitting a CC change that adjusts one of the XK's drawbars, which I don't want.
It's easy enough to move the drawbar back to the intended position after the program change, but it seems like on a board as smart as the Kronos, there has to be a way to stop this weirdness from happening.
Thanks in advance!
Kronos 2 Program Change from Set List Mode
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Kronos 2 Program Change from Set List Mode
Korg Kronos 2-73, Korg M3-61, Hammond Xk-1c, Ensoniq SQ-1+, Yamaha CS-1x. Korg Triton Rack, Korg TR Rack, Roland JV-1080, Roland Fantom XR, Alesis QSR, Korg Legacy Edition, Cakewalk by Bandlab.
-
Schmooster
- Full Member
- Posts: 239
- Joined: Sat Jan 13, 2007 11:02 am
Is it a modified program and the original is still on there? I'm just thinking if you've saved it as a 'copy'? The only other suggestion is change the XK program so that the drawbar 'movement' puts it where you actually want it to be after the program change - assuming it's moving it the same way each time - odd one though. 
_________________________________________
_________________________________________
Current: Korg Kronos61, Korg TR76, Korg Trinity61
_________________________________________
Past Korg: M1, Trinity V3, Triton LE, Triton Rack, 05R/W, Karma, PA1x, M50,
_________________________________________
IBM C20 dual Xeon running Omnisphere, Kontakt 5, FLStudio thru 2 x Audigy 2ZS S/PDIF
_________________________________________
Other: Yamaha SY85, Kurzweil PC3K6, Roland XP50, JV1080, JV2080
_________________________________________
Current: Korg Kronos61, Korg TR76, Korg Trinity61
_________________________________________
Past Korg: M1, Trinity V3, Triton LE, Triton Rack, 05R/W, Karma, PA1x, M50,
_________________________________________
IBM C20 dual Xeon running Omnisphere, Kontakt 5, FLStudio thru 2 x Audigy 2ZS S/PDIF
_________________________________________
Other: Yamaha SY85, Kurzweil PC3K6, Roland XP50, JV1080, JV2080
-
StephenKay
- KARMA Developer<br>Approved Merchant
- Posts: 2992
- Joined: Tue Jun 18, 2002 2:16 am
- Location: Scottsdale, AZ
- Contact:
In Global Mode > MIDI, you can try turning off the Enable Control Change checkbox, I think that will disable the Kronos from sending and receiving CCs (all) - though that may not be what you want. That's kind of a "gross" fix that may cause other problems, if you play the XK from the Kronos or vice versa.
A better fix would be to see what CCs the XK's drawbars are set to receive on, and see if you can modify that in the XK. There must be a setting in there for that (hopefully).
A better fix would be to see what CCs the XK's drawbars are set to receive on, and see if you can modify that in the XK. There must be a setting in there for that (hopefully).
