Update to OS 2.0 failed at 37%

coolpal · Post by **coolpal** » Sat Jul 01, 2017 3:56 am

Figured out that .001 through .005 pkg files needed to be extracted.

Now installing and hopefully it should complete the installation.

AntonySharmman · Post by **AntonySharmman** » Sat Jul 01, 2017 10:40 am

coolpal wrote:Figured out that .001 through .005 pkg files needed to be extracted.

Not accurate ... just copy the whole extracted folder "Pa4X_OS_and_Resources_v200.pkg" in a thumb drive >=4GB
that you have formatted in Pa4X , and browse in the updater file "Pa4X_OS_and_Resources_v200.pkg.001".
Pa4X Bios when see pkg.00x , will check the integrity of all files 1-x and then it will start updating automatically ,
so if fails then it's a media error !

coolpal · Post by **coolpal** » Sat Jul 01, 2017 4:38 pm

Thanks. I will format a blank USB 4 GB and try.

keith-helen · Post by **keith-helen** » Sat Jul 01, 2017 6:33 pm

Hi Anthony and others

I wish I had seen your article first.

I downloaded the files to my server, to a thumb drive and any other device I had near me.

the keyboard was connected to the computer but it wouldn't load the files. It didn't recognise 001.

What I did was to extract the down loaded files separately onto my thumb drive and then inserted into the keyboard. It seems they extracted further. All works ok.

I am sure I did something wrong initially, but it all works fine.

Best wishes

Keith Lawton

Snoopy · Post by **Snoopy** » Sat Jul 01, 2017 6:41 pm

coolpal wrote:Figured out that .001 through .005 pkg files needed to be extracted.

Now installing and hopefully it should complete the installation.

Hi,

the update consists of 6 files, not 5 !!!

Korg Forums

Update to OS 2.0 failed at 37%

Update to OS 2.0 failed at 37%

Re: Update to OS 2.0 failed at 37%

Re: Update to OS 2.0 failed at 37%